Ryobi FL1400, FL1200 Switch, Rotating Head, Bulb Replacement, To Replace Bulb

Page 4

OPERATION

SWITCH

See Figure 2.

To turn your flashlight on and off, depress switch trigger.

180° ROTATING HEAD

See Figure 2.

Your flashlight has the feature of rotating the head 180° back and forth.

BULB REPLACEMENT

See Figure 3.

When purchasing replacement bulb, request recommended part number 973638-001 for Model FL1200 and part number 981258-003 for Model FL1400.

TO REPLACE BULB:

Remove battery pack from flashlight.

Remove lens cover by turning cover in counterclockwise direction, then remove cover.

Remove old bulb from spring.

Position new bulb in spring.

Replace lens cover.

Replace battery pack.

Note: For your convenience, your flashlight has a spare bulb storage area. It is located behind the lens cover. See Figure 3.

SWITCH

TRIGGER

180° ROTATING HEAD

Fig. 2

BULB STORAGE

AREA

BULB

LENS COVER

Fig. 3

Page 4

Image 4
Contents Important Safety Rules for Battery Tools Rules for Safe OperationRead ALL Instructions Avoid Dangerous EnvironmentImportant Safety Instructions for Charger Safety Rules for FlashlightOperation To INSTALL/REMOVE Battery PackCharging Your Flashlight Switch Bulb ReplacementSwitch Trigger Rotating Head Bulb Storage Area Lens Cover Rotating HeadMaintenance BatteriesOperators Manual Cordless Flashlight Model Numbers FL1200 / FL1400