Ryobi BE321VS manual Assembly

Page 9

FEATURES

KNOW YOUR BELT SANDER

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

SWITCH TRIGGER

To turn the sander ON, depress the switch trigger. Release switch trigger to turn your sander OFF.

LOCK- ON BUTTON

The lock-on feature allows you to lock the switch trigger in the ON position. Locking the switch trigger on allows you to operate the sander for extended periods of time.

TRACKING KNOB

The tracking knob allows you to easily adjust the belt tracking.

VARIABLE SPEED CONTROL DIAL

The variable speed control feature allows the sander to develop a no load speed that can be adjusted from 775 to 1,150 ft./min. by rotating the dial from A to F. The variable speed control dial is conveniently located on the side of the front handle.

DUST COLLECTION BAG

The dust collection bag attaches to the sander and keeps dust to a minimum.

BELT TENSION RELEASE LEVER

The tension release lever aids in quick and easy belt changes.

GRIPZONEOVERMOLD TECHNOLOGY

The sander features Gripzone™ overmold technology for improved comfort with a positive grip.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Variable Speed Belt Sander

Dust Collection Bag

Sanding Belt, 80 Grit

Operator’s Manual

Warranty Registration Card

WARNING:

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

9

Image 9
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Electrical Cord Length Wire Size A.W.GDouble Insulation Electrical ConnectionProduct Specifications FeaturesAssembly Operation Setting the Belt Sander SpeedApplications Selecting Sanding BeltsVariable Speed Proper Hand PlacementTurning ON/OFF the Sander To FTo INSTALL/CHANGE Sanding Belt Unplug your sanderPosition sander as shown Operating the Sander Locking on the SanderTo lock-on the sander Excessive pressure will result in the followingTo Adjust Sanding Belt Tracking To install/remove dust bag Dust BAGTo empty dust bag Maintenance General MaintenanceLubrication See Figures 11 Timing Belt ReplacementService Model NO. and Serial no