Ryobi SC164VS warranty Loose Parts, Tools Needed, Blade, Plastic Tubing

Page 8

LOOSE PARTS

Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.

•3 mm T-Handle Hex Key

•4 mm Hex Key

•Blade(s)

•Plastic Tubing

4 mm HEX KEY

3 mm T-HANDLE HEX KEY

Fig. 2

The following tools (not included) are needed for adjustments and alignment:

• Combination Square

• Phillips Screwdriver

• Slotted Screwdriver

Fig. 3

Page 8

Image 8

Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Scroll SAWIntroduction Table of ContentsProduct Specifications Blade Coasts After Turn OFF Rules for Safe OperationRead ALL Instructions Before Making a CUT, be Sure ALL ADJUST- Ments are Secure Do not Remove Jammed Cutoff Pieces until blade has stoppedSafety and International Symbols MeaningElectrical Extension CordsElectrical Connection Grounding InstructionsSPM Glossary of Terms for WoodworkingUnpacking Loose Parts Tools NeededBlade Plastic TubingFeatures Know Your Scroll SAWAssembly Mounting Scroll SAW to WorkbenchClamping Scroll SAW to Workbench Clamp SAW Base Mounting Board WorkbenchAdjustments Drop FootSawdust Blower Squaring the SAW Table to the BladeAdjusting Drop Foot Indicator Table Lock KnobBevel Scale Screw Blade Tension KnobInstalling Blades Drop Foot Lock Knob Blade Clamp Screw SAW Blade Throat PlateOperation Blade Information Using Variable SpeedChoice of Blade and Speed Scroll Cutting Interior Scroll CuttingStack Cutting Drill Hole Interior CUT WorkpieceMaintenance General MaintenanceARM Bearings Motor BrushesTroubleshooting Problem Cause SolutionPage Mm Variable Speed Scroll Saw Model SC164VS Ryobi TECHNOLOGIES, INC