Ryobi SC164VS warranty Features, Know Your Scroll SAW

Page 9

FEATURES

KNOW YOUR SCROLL SAW

Before attempting to use your saw, familiarize yourself with all the operating features and safety requirements of your Ryobi scroll saw. See Figure 4.

This versatile, variable speed scroll saw is great for making toys, puzzles, games, artwork, and jewelry. It is a handy do- it-yourself tool. It cuts wood, wood composition products, plastic, and other fibrous material up to 2 in. (51 mm) thick. It also cuts nonferrous metals (aluminum, brass, copper).

Bevel Scale

The bevel scale and indicator show you the degree the saw table is tilted.

Sawdust Blower

Keeps the line of the cut on the workpiece clean for more accurate scroll cuts. For best results, always direct air flow at the blade and the workpiece.

Sawdust Exhaust

This feature will allow you to attach any 1-1/4 in. (32 mm) vacuum hose for easy sawdust collection.

Saw Table with Throat Plate

Your scroll saw has an aluminum saw table with tilt control for maximum accuracy. The throat plate, inserted in the saw table, allows for blade clearance.

Blade Clamp Screws

Blade clamp screws are used when changing saw blades.

Blade Tension Knob

Loosen or tighten the blade tension by turning the blade tension knob.

Drop Foot

This foot should always be lowered until it just rests on top of the workpiece to prevent the workpiece from lifting, yet not so much that the workpiece drags.

Drop Foot Lock Knob

Allows you to raise or lower the drop foot and lock it in place.

SAWDUST

BLOWER

SAW BLADE

THROAT

PLATE

Switch and Switch Key

Your scroll saw has an easy access power switch. To lock in the OFF position, remove the yellow switch key. Place the key in a location inaccessible to children and others not qualified to use the tool.

Table Lock Knob

Allows you to tilt the table and lock it at the desired angle up to 45°.

Variable Speed Knob

Turn the knob to adjust the speed from the high speed of approximately 1600 SPM (strokes per minute) to the low speed of approximately 400 SPM.

BLADE

TENSION KNOB

DROP FOOT

LOCK KNOB

BLADE CLAMP

SCREWS

DROP FOOT

30

 

 

 

15

 

 

 

0

 

 

MOTOR

 

 

SAW

 

 

 

 

 

TABLE

 

BEVEL SCALE

SWITCH AND

SAWDUST

VARIABLE

TABLE

SWITCH KEY

 

EXHAUST

SPEED KNOB

LOCK KNOB

 

 

 

Fig. 4

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Thank YOU for Buying a Ryobi Scroll SAW Save this Manual for Future ReferenceTable of Contents Product SpecificationsIntroduction Rules for Safe Operation Read ALL InstructionsBlade Coasts After Turn OFF Do not Remove Jammed Cutoff Pieces until blade has stopped Before Making a CUT, be Sure ALL ADJUST- Ments are SecureMeaning Safety and International Symbols Extension Cords Electrical Electrical Connection Grounding InstructionsGlossary of Terms for Woodworking UnpackingSPM Tools Needed Loose PartsBlade Plastic TubingKnow Your Scroll SAW FeaturesMounting Scroll SAW to Workbench AssemblyClamping Scroll SAW to Workbench Clamp SAW Base Mounting Board WorkbenchDrop Foot AdjustmentsSawdust Blower Squaring the SAW Table to the BladeIndicator Table Lock Knob Adjusting Drop FootBevel Scale Screw Blade Tension KnobDrop Foot Lock Knob Blade Clamp Screw SAW Blade Throat Plate Installing BladesOperation Using Variable Speed Choice of Blade and SpeedBlade Information Interior Scroll Cutting Scroll CuttingStack Cutting Drill Hole Interior CUT WorkpieceGeneral Maintenance MaintenanceARM Bearings Motor BrushesProblem Cause Solution TroubleshootingPage Ryobi TECHNOLOGIES, INC Mm Variable Speed Scroll Saw Model SC164VS
Top Page Image Contents