Ryobi TS230 warranty Operators Manual, Thank YOU for Buying a Ryobi Compound Miter SAW

Page 1

OPERATOR'S MANUAL

10 in. (254 mm) Compound Miter Saw

Model TS230 - Double Insulated

NGER

DA DSAWAY

FROMBLADE

0

15

30

45

45 40

30

20

10

0

10

20

0

THANK YOU FOR BUYING A RYOBI COMPOUND MITER SAW.

Your new saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new saw.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your saw properly and only for what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Service Registration Card so we can be of future service to you.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1 Contents
Thank YOU for Buying a Ryobi Compound Miter SAW Operators ManualTable of Contents Rules for Safe Operation Symbol Meaning Safety Alert SymbolDouble Insulation Read ALL Instructions Before Making a CUT, be Sure ALL Adjustments are Secure Additional Rules For Safe Operation For Compound Miter Saws Glossary of Terms for Woodworking SpecificationsUnpacking and Checking Contents Know Your Compound Miter SAW FeaturesAMP Motor Cutting CapacitiesMiter Lock Handle Carrying HandleLOCK-OFF Lever Spindle Lock ButtonSELF-RETRACTING Lower Blade Guard Optional AccessoriesWork Clamp Mounting HolesTo Install Blade AssemblyDust Guide UpperLower Blade Guard Lower Blade Guard NotchBlade Blade Bolt Spindle Lock ButtonAdjustments Squaring the Miter Table to the Fence See Figures 17 Squaring the SAW Blade to the FenceBlade Framing Square Squaring the Blade to the Miter Table Lock Nuts Positive Stop AdjustmentSee Figures 21 Miter Blade Table Combination SquareOperation Crosscutting Cutting with Your Compound Miter SAWStraight Crosscut Bevel CUT Left Side Indicator Point Scale Mounting Bracket Right SideSee Figures 27 Bevel CUTTo Make a Compound CUT with Your Miter SAW Compound Miter CUTCutting Compound Miters COMPOUND-ANGLE Settings for Popular StructuresLaying Molding Flat on the Miter Table Cutting Crown MoldingCeiling Alternate Method of Clamping Workpiece Cutting Warped MaterialSee Figures 31 Right Wrong Wide Board ClampGeneral MaintenanceLubrication Extension CordsBrush CAP Brush Assembly Brush ReplacementBrush Assembly CAP Problem Cause Solution TroubleshootingRyobi Canada INC Ryobi America Corporation