FEATURES
KNOW YOUR COMPOUND MITER SAW
See Figure 2.
Before attempting to use your saw, familiarize yourself with all operating features and safety requirements.
WARNING:
Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
13 AMP MOTOR
Your saw has a powerful 13 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings, and has externally accessible brushes for ease of servicing.
10 in. (254 mm) CARBIDE TIPPED BLADE
A 10 in. (254 mm) carbide tipped saw blade is included with your compound miter saw. It will cut materials up to
CUTTING CAPACITIES
When the miter angle (miter table) is set at 0° and the bevel angle is set at 0° :
Your saw will cut materials up to a maximum width of
It will cut materials up to a maximum thickness of
When the miter angle (miter table) is set at 45° and the bevel angle is set at 0° :
Your saw will cut materials up to a maximum of
When the miter angle (miter table) is set at 90° and the bevel angle is set at 45° :
Your saw will cut materials up to a maximum of
When the miter angle (miter table) is set at 45° and the bevel angle is set at 45° :
Your saw will cut materials up to a maximum of 4 in. (101.6 mm) wide X
UPPER
BLADE GUARD
DUST GUIDE
BEVEL
LOCK KNOB
| 0 |
BEVEL SCALE | 15 |
30 | |
| 45 |
FENCE |
|
WORK CLAMP
MITER 
TABLE FRAME
8 mm WORK
CLAMP SCREW
SAW ARM | SWITCH |
| |
| GER |
| DAN |
| SWITCH TRIGGER |
LOWER
BLADE GUARD
MITER TABLE
|
| NO HANDS | |
|
| ZONE LABEL | |
|
|
| "NO HANDS ZONE" |
|
|
| BOUNDARY LINE |
| 5 |
| MITER SCALE |
| 4 |
|
|
| 0 |
|
|
| 4 |
|
|
| 30 |
|
|
| 20 |
| ZERO CLEARANCE |
| 10 |
| |
0 |
|
| |
10 |
|
| |
20 |
|
| THROAT PLATE |
0 |
|
| |
|
|
| |
|
|
| MITER |
|
|
| LOCK PLATE |
|
|
| MITER |
POSITIVE STOP (S) | MITER TABLE | LOCK HANDLE | |
| |||
CONTROL ARM | Fig. 2 |
|
Page 9