Ryobi R10633 specifications Operators Manual, Save this Manual for Future Reference

Page 1

OPERATOR'S MANUAL

5-1/2 in. (140 mm), 18 VOLT CORDLESS CIRCULAR SAW MODEL NO. R10633

SPECIFICATIONS:

Blade Diameter

5-1/2 in. (140 mm)

 

Blade Arbor

3/8 in. (10 mm)

 

 

 

 

Cutting Depth at 0°

1-9/16 in. (40 mm)

 

 

 

 

Cutting Depth at 45°

1-1/8 in. (29 mm)

 

 

 

 

No Load Speed

4,200 RPM

 

Motor

18 Volt DC

 

Charge Rate

1 Hour

 

 

 

 

Charger Rating

120 Volts, 60 Hz, AC

 

Your new cordless circular saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand operator's manual.

Thank you for buying a Ryobi cordless circular saw.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1
Contents Save this Manual for Future Reference Operators ManualAccessories Table of ContentsUnpacking Model Battery Pack Charger General Safety RulesAdditional Rules For Safe Operation Specific Safety RulesImportant Safety Instructions for Charger Important Safety Instructions for Charger Symbol Meaning SymbolsSymbol Name DESIGNATION/EXPLANATION Switch FeaturesKnow Your Cordless Circular SAW ApplicationsOperation Charging Battery PackImportant Charger Information LED Function of ChargerTo Assemble or Remove Blade To Install Battery PackBlade Guard System SAW BladesTo Remove Blade ScrewKickback is Caused by KickbackTo Lessen the Chance of Kickback Kickback Blade SET TOO DeepTo Adjust Blade Depth Depth of CUT AdjustmentStarting a CUT To Help Maintain Control To Cross CUT or RIP CUT RIP Cuts Base AssemblyWidth of CUT Scale TOP View of SAW Guideline Front of SAW Blade Guide NotchBlade Guide Notch Guideline To Adjust Bevel SettingPositive 0 Bevel Stop To AdjustTo Check To Pocket CUTTo Assemble Optional RIP Guide To RIP CUTDisposal of the Exhausted Battery MaintenanceBattery Pack Preparation for Recycling BatteriesService Model NO. and Serial no