FEATURES
KNOW YOUR LASER CIRCULAR SAW
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating Features and Safety Rules.
SWITCH TRIGGER
The saw has a conveniently located switch trigger on the underside of the handle.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turn- ing the blade screw.
NOTE: Do not run the circular saw with spindle lock en- gaged.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
The
BEVEL ADJUSTMENT KNOB
The bevel adjustment feature allows you to make bevel cuts of 45° and 90º.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can be used to measure up to four inches to the right side of the blade. It can be used to measure up to one inch to the left side of the blade.
LASER GUIDE
The laser guide will generate a red colored line on the work surface when turned on.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Circular Saw with Laser
Blade Wrench AAA batteries (2)
Lanyard (not included in combo) Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
10