Table of Contents, General Safety Rules

	TABLE OF CONTENTS
■	Product Specifications	1
■	Table Of Contents	2
■	General Safety Rules	2-3
■	Specific Safety Rules	3-4
■	Features	6
■	Assembly	7-8
■	Operation	9-15
■	Maintenance	16
■ Exploded View And Parts List		18-21
■	Service Information	22
	GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

■Keep your work area clean and well lit. Clut- tered benches and dark areas invite accidents.

■Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

■Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

■Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in

any way. Double insulation eliminates the need for the three-wire grounded power cord and grounded power supply system.

■Avoid body contact with grounded surfaces, such as pipes, radiators, ranges, and refrig-

erators. There is an increased risk of electric shock if your body is grounded.

■Don’t expose power tools to rain or wet condi- tions. Water entering a power tool will increase the risk of electric shock.

■Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

■When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock.

Personal Safety

■Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

■Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

■Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Page 2

TABLE OF CONTENTS

GENERAL SAFETY RULES