Ryobi CSB130JS, CSB120 specifications Assembly, To Assemble or Remove Blade, Packing List

ASSEMBLY

■Carefully remove the saw and accessories from box. Make sure all items listed in the Packing List are included.

■Do not discard the packing material until you have carefully inspected and satisfactorily operated saw.

■Examine all parts and accessories to make sure that no breakage has occurred during shipping. Any damaged part should be replaced before attempting to use the tool.

WARNING:

Your saw should never be connected to a power supply when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Disconnecting your saw will prevent accidental starting that could cause serious personal injury.

WARNING:

7-1/4 in. (184 mm) blade is the maximum blade capacity of your saw. Also, never use a blade that is too thick to allow outer blade washer to engage with the flat on the spindle. Larger blades will come in contact with the blade guards, while thicker blades will prevent blade screw from securing blade on spindle. Either of these situations could result in a serious accident.

TO ASSEMBLE OR REMOVE BLADE

See Figures 2 and 3.

■Unplug your saw.

WARNING:

Failure to unplug your saw could result in accidental starting causing possible serious personal injury.

MODEL CSB120

■Place your blade on a piece of scrap as shown in Figure 3 and remove blade screw.

NOTE: With blade teeth embedded in the wood, turn blade screw counterclockwise to remove.

MODEL CSB 130 AND CSB130JS

■Depress spindle lock button to secure blade when turning blade screw. See Figure 4.

■Remove spring washer and outer blade washer ("D" washer). NOTE: BLADE CAN BE REMOVED AT THIS POINT. If you are assembling blade for the first time or changing blade, continue to follow the steps on Page 8.

	PACKING LIST
CSB120	CSB130 & CSB130JS
Circular Saw	Circular Saw
7-1/4 Blade	7-1/4 Blade
Wrench	Wrench
Warranty Card	Warranty Card
Operator's Manual	Dust Nozzle CSB130JS
	Edge Guide CSB130JS
	Carrying Case CSB130JS
	and CSB130K
	Operator's Manual
	LOWER BLADE
	GUARD HANDLE
		BLADE
		OUTER BLADE
		WASHER
		("D" WASHER)
		BLADE
		SCREW
SPINDLE
INNER BLADE WASHER
	(MODEL CSB120)	SPRING
INNER FLANGE BUSHING		WASHER

(MODELS CSB130 AND CSB130JS)	Fig. 2
	LOWER BLADE
	GUARD
	HANDLE

BLADE
WRENCH	BLADE SCREW	1 X 4
	MODEL CSB 120	Fig. 3

Page 7