Ryobi Assembly Instructions for Table Saw Extension Rails
Page 5

ASSEMBLY

TO ATTACH FRONT EXTENSION RAIL

See Figures 2 and 4.

Remove end caps from right end of front rail on your BT3000 table saw. See Figure 4.

Slide one of the T-nuts into bottom channel of front rail on your saw. Slide a second T-nut into back channel of front rail.

Attach one of the connectors provided to T-nut on bottom of front rail and secure with a washer(5/16 in.) and a hex bolt (5/16-18 x 1/2 in.). Finger tighten only.

Orient front extension rail so that it matches front rail of your saw. Place two T-nuts in matching channels of front extension rail.

Connect bottom T-nut to connector on front rail of your saw and secure with a washer (5/16 in.) and a hex bolt (5/16 in. x 1/2 in.). Finger tighten only.

Attach a second connector to back channel of front rail and front extension rail. Secure it to each T-nut with a washer (5/16 in.) and hex bolt (5/16 in. x 1/2 in.). Finger tighten only.

TO ATTACH REAR EXTENSION RAIL

See Figures 3 and 5.

The rear extension rail attaches to rear rail on your BT3000 table saw by repeating the above procedure for attaching front extension rail. The only difference being the rear rail has a different configuration. See Figure 3.

NOTE: There are several repetitive steps required for assembling this kit. Please study and review illustrations closely for clarification when asked to repeat a procedure.

After attaching rear rail extension to your saw you should now have the front and rear extension rails attached to your saw using four connectors, eight T-nuts, eight washers (5/16 in.), and eight hex bolts (5/16 in. x 1/2 in.).

Using a 1/2 in. socket or the small wrench supplied with your table saw, tighten all eight bolts securely. Assure the two rail sets are straight before, during and after tightening.

FRONT

EXTENSION RAIL

T-NUT

HEX BOLT

 

CONNECTOR

 

WASHER

 

TABLE BRACKET

FRONT RAILS

SHOWN ATTACHED

Fig. 2

REAR

EXTENSION RAIL

T-NUT

CONNECTOR

WASHER

HEX BOLT

TABLE BRACKET

SPACER

REAR RAILS SHOWN

ATTACHED

Fig. 3

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Save this Manual for Future Reference Operators Manual Wide Table KITRules for Safe Operation IntroductionUnpacking SymbolsSafety and International Symbols Tools Needed Loose PartsTo Attach Rear Extension Rail AssemblyTo Attach Front Extension Rail Auxiliary Table TOP not supplied To Attach Table BracketsAdditional Table LEG Options Table Legs not suppliedTable Legs Made from 2 X 4s Rear Extension Table TOP not supplied Ryobi Wide Table KIT no Parts List4730300 Service HOW to Order Repair Parts

BT300 specifications

The Ryobi BT300 is a versatile and powerful table saw that stands out in the realm of woodworking tools. Designed for both professionals and DIY enthusiasts, this saw combines cutting-edge technology with user-friendly features to ensure a seamless cutting experience.

One of the standout characteristics of the Ryobi BT300 is its robust 15-amp motor, which delivers impressive power and performance. This means the saw can easily handle a variety of materials, from softwoods to hardwoods, without bogging down. The saw has a maximum cutting depth of 3.125 inches at 90 degrees and 2.25 inches at 45 degrees, making it suitable for a wide range of cutting tasks.

The BT300 integrates a large 30-inch rip fence, ensuring accurate cuts every time. The fence can be easily adjusted, providing users with the flexibility to perform both rip cuts and crosscuts with precision. Additionally, this model features a miter gauge, which allows for bevel cuts and adds to the overall versatility of this tool.

Another key feature of the Ryobi BT300 is its lightweight and portable design. Weighing in at a manageable 58 pounds, the saw can be moved around the workshop or job site with ease. The integrated carry handle enhances portability, making it convenient for woodworkers who often need to transport their tools.

Safety is paramount when it comes to woodworking, and the BT300 incorporates several safety features to protect users. The blade guard ensures that operators are shielded from accidental contact with the blade, while the anti-kickback pawls help prevent the material from being thrown back towards the user during cutting.

In terms of technology, the Ryobi BT300 utilizes advanced alignment and adjustment systems to make setup and use straightforward. The onboard storage for accessories keeps everything organized and within reach.

Overall, the Ryobi BT300 is engineered to provide a high level of performance, safety, and convenience. Its powerful motor, accurate ripping capabilities, and user-friendly design make it an excellent choice for anyone looking to take their woodworking projects to the next level. Whether you're building furniture, cabinets, or any other woodworking project, the Ryobi BT300 stands ready to deliver exceptional results.
Top Page Image Contents