Ryobi CSB141LZ manual To Check Positive 0 Bevel Stop

Page 20

POSITIVE 0° BEVEL STOP

The saw has a positive 0° bevel stop that has been factory adjusted to assure 0° angle of the saw blade when making 90° cuts.

nUnplug the circular saw.

nPlace the saw in an upside down position on a work- bench.

nCheck the squareness of the saw blade to the base of the saw using a combination square.

nUnplug the circular saw.

nLoosen bevel adjustment knob.

nTurn set screw with hex key and adjust base until it is square with the saw blade.

nTighten bevel adjustment knob securely.

WARNING:

Attempting a bevel cut without having the bevel ad- justment knob securely tightened can result in serious injury.

� ��

��

�

BEVEL ADJUSTMENT

KNOB

COMBINATION

SQUARE

SET SCREW

Fig. 23

Image 20

Contents OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaSpecific Safety Rules Causes and Operator Prevention of KickbackLaser Guide Warnings Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningElectrical Double InsulationElectrical Connection Extension CordsFeatures Product SpecificationsAssembly Attaching Blade See Figures 2Removing Blade Dust Nozzle KITOperation ApplicationsKickback See Figures 7SAW Blades Blade Guard SystemAdjusting Blade Depth STARTING/STOPPING the SAWOperating the SAW See Figures 13Using the Laser Guides Length of CUT ScaleCross CUTTING/RIP Cutting See Figures 18Bevel Cutting See Figures 21Positive 0 Bevel Stop To Check Positive 0 Bevel StopPocket Cutting See Figures 24See Figures 26 AdjustmentsAdjusting the Lasers Lubrication MaintenanceGeneral Maintenance Service Model NO. and Serial no