Ryobi CSB1308 specifications SAW Blades, Blade Guard System, Blade SET TOO Deep

Page 8

ASSEMBLY

■Wipe a drop of oil onto inner flange bushing and outer blade washer ("D" washer) where they contact blade.

WARNING:

If inner flange bushing has been removed, replace it before placing blade on spindle. Failure to do so could cause an accident since blade will not tighten properly.

■Fit saw blade inside blade guard and onto spindle. NOTE: The saw teeth point upward at the front of the saw as shown in Figure 2.

■Replace "D" washer and spring washer.

NOTE: "Cupped" side of spring washer goes against "D" washer. See Figure 2.

■Replace blade screw. Tighten blade screw securely. NOTE: Turn blade screw clockwise to tighten.

REMEMBER: Never use a blade that is too thick to allow the "D" washer to engage with the flat on the spindle.

SAW BLADES

The best of saw blades will not cut efficiently if they are not kept clean, sharp, and properly set. Using a dull blade will place a heavy load on your saw and increase the danger of kickback. Keep extra blades on hand, so that sharp blades are always available.

Gum and wood pitch hardened on blades will slow your saw down. Remove saw blade from your saw and use gum and pitch remover, hot water, or kerosene to remove these accumulations. DO NOT USE GASOLINE.

BLADE GUARD SYSTEM

See Figure 3.

The lower blade guard attached to your circular saw is there for your protection and safety. It should never be altered for any reason. If it becomes damaged, do not operate your saw until the damage has been repaired or replaced. Always leave guard in operating position when using your saw.

DANGER:

When sawing through work, lower blade guard does not cover blade on the underside of work. Since blade is exposed on underside of work, keep hands and fingers away from cutting area. Any part of your body coming in contact with moving blade will result in serious injury.

Never use saw when guard is not operating correctly. Guard should be checked for correct operation before each use.

NOTE: The guard is operating correctly when it moves freely and readily returns to the closed position. If you drop your saw, check the lower blade guard for damage at all depth settings before reuse.

SPINDLE LOCK

BUTTON

TO

TIGHTEN

BLADE

SCREW

TO

LOOSEN

BLADE

WRENCH

Fig. 3

KICKBACK

BLADE SET TOO DEEP

Fig. 4

 

Page 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operators Manual Thank YOU for Buying a Ryobi Circular SAWTable of Contents General Safety RulesSpecific Safety Rules ServiceSpecific Safety Rules for Circular Saws Tool Use and CareCauses and Operator Prevention of Kickback KickbackSymbol Meaning Safety Alert Symbol Additional Rules for Safe OperationFeatures SwitchKnow Your Circular SAW ApplicationsPacking List AssemblyTo Assemble or Remove Blade SAW Blades Blade Guard SystemSpindle Lock Button Tighten Blade Screw Loosen Wrench Blade SET TOO DeepOperation Depth of CUT Adjustment To Adjust Blade DepthStarting a CUT To Help Maintain ControlYour SAW from Workpiece While the Blade is Moving Cord ClipClamps Workpiece Place RIP Guide ThroughAdjust Bevel Setting To Bevel CUTViewing Window Bevel Scale Lower Blade GuardPositive 0 Bevel Stop Length of CUT ScaleTo Pocket CUT Maintenance GeneralLubrication Double InsulationPage Optional Parts List Service Model NO. and Serial no

CSB1308 specifications

The Ryobi CSB1308 is a versatile and powerful cordless circular saw that stands out in the DIY and professional tool market. Designed with both portability and performance in mind, this saw is ideal for a variety of cutting tasks whether you are working on construction, home renovation, or other woodworking projects.

One of the main features of the Ryobi CSB1308 is its lightweight design, making it easy to handle and maneuver in tight spaces. The saw is equipped with a robust 18V motor that delivers impressive cutting power, enabling it to slice through various materials with ease. It has a maximum cutting depth of 50 mm at 90 degrees and 36 mm at 45 degrees, providing versatility for different cutting applications.

The CSB1308 features a laser guide that helps ensure precision cuts every time. This integrated laser technology aids users in aligning their cuts accurately, which is especially useful when working on intricate designs or when precision is paramount. This technology greatly enhances the user's ability to make clean and straight cuts along the intended lines.

Another notable characteristic of the Ryobi CSB1308 is its adjustable cutting angle and depth settings. This allows users to customize their cuts according to project requirements, making it suitable for both angled and straight cuts. Additionally, the saw has a spindle lock feature for simple blade changes, promoting efficiency and convenience.

The CSB1308 employs Ryobi’s ONE+ battery technology, which allows it to be powered by any Ryobi ONE+ battery, providing users with the flexibility of using the same batteries across multiple Ryobi tools. This not only saves money but also reduces clutter on the worksite.

Safety features are also a priority with the Ryobi CSB1308. The saw is equipped with a blade guard designed to prevent accidental contact with the blade, enhancing user protection. Furthermore, the ergonomic handle ensures a comfortable grip, reducing fatigue during extended usage.

In summary, the Ryobi CSB1308 combines power, precision, and safety in a convenient cordless design. With features such as laser guidance, adjustable cutting angles, and compatibility with Ryobi’s ONE+ battery system, it is an excellent choice for both professionals and DIY enthusiasts looking for a reliable circular saw to tackle various cutting tasks. Whether you are a seasoned tradesperson or a weekend warrior, this tool is sure to meet and exceed your cutting needs.
Top Page Image Contents