Ryobi CSB1308 specifications Operation

Page 9

OPERATION

WARNING:

Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc., contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual, and review frequently for continuing safe operation and for instructing others who may use this tool.

KICKBACK

See Figure 4.

THE BEST GUARD AGAINST KICKBACK IS TO AVOID

DANGEROUS PRACTICES.

WRONG

Kickback occurs when the blade stalls rapidly and the saw is driven back toward you. Blade stalling is caused by any action which pinches the blade in the wood.

DANGER:

Release switch immediately if blade binds or saw stalls. Kickback will cause you to lose control of your saw. Loss of control can lead to serious injury.

KICKBACK IS CAUSED BY:

■Incorrect blade depth setting. See Figure 4.

■Sawing into knots or nails in work.

■Twisting blade while making a cut.

■Making a cut with a dull, gummed up, or improperly set blade.

■Incorrectly supporting work. See Figure 5.

■Forcing a cut.

■Cutting warped or wet lumber.

■Tool misuse or incorrect operating procedures.

TO LESSEN THE CHANCE OF KICKBACK:

■Always keep the correct blade depth setting–the correct blade depth setting for all cuts should not exceed 1/4 in. below the material to be cut. See Figure 6.

■Inspect the work for knots or nails before beginning a cut. Never saw into a knot or nail.

■Make straight cuts. Always use a straight edge guide when rip cutting. This helps prevent twisting the blade in the cut.

■Always use clean, sharp, and properly set blades. Never make cuts with dull blades.

■To avoid pinching the blade, support the work properly before beginning a cut. The right way to support large pieces of work are shown in Figure 7.

■When making a cut, use steady, even pressure. Never force cuts.

Fig. 5

CORRECT BLADE DEPTH SETTING =

BLADE EXPOSED 1/4 in. OR

LESS ON UNDERSIDE OF WORKPIECE

Fig. 6

RIGHT

Fig. 7

■Always hold your saw firmly with both hands and keep your body in a balanced position so as to resist the forces of kickback should it occur.

■Do not cut warped or wet lumber.

WHEN USING YOUR SAW, ALWAYS STAY ALERT AND EXERCISE CONTROL. DO NOT REMOVE YOUR SAW FROM WORKPIECE WHILE THE BLADE IS MOVING.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Thank YOU for Buying a Ryobi Circular SAW Operators ManualGeneral Safety Rules Table of ContentsService Specific Safety RulesSpecific Safety Rules for Circular Saws Tool Use and CareKickback Causes and Operator Prevention of KickbackAdditional Rules for Safe Operation Symbol Meaning Safety Alert SymbolSwitch FeaturesKnow Your Circular SAW ApplicationsAssembly To Assemble or Remove BladePacking List Blade Guard System SAW BladesSpindle Lock Button Tighten Blade Screw Loosen Wrench Blade SET TOO DeepOperation To Adjust Blade Depth Depth of CUT AdjustmentStarting a CUT To Help Maintain ControlCord Clip Your SAW from Workpiece While the Blade is MovingPlace RIP Guide Through Clamps WorkpieceTo Bevel CUT Adjust Bevel SettingViewing Window Bevel Scale Lower Blade GuardLength of CUT Scale Positive 0 Bevel StopTo Pocket CUT General MaintenanceLubrication Double InsulationPage Optional Parts List Service Model NO. and Serial no

CSB1308 specifications

The Ryobi CSB1308 is a versatile and powerful cordless circular saw that stands out in the DIY and professional tool market. Designed with both portability and performance in mind, this saw is ideal for a variety of cutting tasks whether you are working on construction, home renovation, or other woodworking projects.

One of the main features of the Ryobi CSB1308 is its lightweight design, making it easy to handle and maneuver in tight spaces. The saw is equipped with a robust 18V motor that delivers impressive cutting power, enabling it to slice through various materials with ease. It has a maximum cutting depth of 50 mm at 90 degrees and 36 mm at 45 degrees, providing versatility for different cutting applications.

The CSB1308 features a laser guide that helps ensure precision cuts every time. This integrated laser technology aids users in aligning their cuts accurately, which is especially useful when working on intricate designs or when precision is paramount. This technology greatly enhances the user's ability to make clean and straight cuts along the intended lines.

Another notable characteristic of the Ryobi CSB1308 is its adjustable cutting angle and depth settings. This allows users to customize their cuts according to project requirements, making it suitable for both angled and straight cuts. Additionally, the saw has a spindle lock feature for simple blade changes, promoting efficiency and convenience.

The CSB1308 employs Ryobi’s ONE+ battery technology, which allows it to be powered by any Ryobi ONE+ battery, providing users with the flexibility of using the same batteries across multiple Ryobi tools. This not only saves money but also reduces clutter on the worksite.

Safety features are also a priority with the Ryobi CSB1308. The saw is equipped with a blade guard designed to prevent accidental contact with the blade, enhancing user protection. Furthermore, the ergonomic handle ensures a comfortable grip, reducing fatigue during extended usage.

In summary, the Ryobi CSB1308 combines power, precision, and safety in a convenient cordless design. With features such as laser guidance, adjustable cutting angles, and compatibility with Ryobi’s ONE+ battery system, it is an excellent choice for both professionals and DIY enthusiasts looking for a reliable circular saw to tackle various cutting tasks. Whether you are a seasoned tradesperson or a weekend warrior, this tool is sure to meet and exceed your cutting needs.
Top Page Image Contents