Bostitch CAP60P-OF manual Trouble Shooting Guide, Problem Probable Cause Correction

Page 10

TROUBLE SHOOTING GUIDE

10

NOTE: REMOVE POWER SOURCE AND DRAIN TANK PRESSURE PRIOR TO MAKING ANY REPAIRS OR ADJUSTMENTS.

Problem

Probable Cause

Correction

Unit will not run

Tank pressure exceeds “cut in” pressure

Once pressure drops below “cut in” pressure, the unit will start.

 

Extension cord causing excessive amp draw

Check guidelines for proper cord gauge

 

 

(use of extension cords is not recommended).

 

Fuse or circuit tripped

Replace fuse or reset breaker

 

Unit not turned on or not plugged in

Check pressure switch and verify that it is in the On position.

 

 

Verify that unit is plugged in.

 

Cold weather conditions

Place compressor in warmer environment for at least 30 minutes

 

(typically temperatures below freezing)

then try restarting.

Air leaks at fittings

Fittings loose

Tighten fitting. Check with soapy water. DO NOT OVER TIGHTEN.

Air leak at pressure switch

Clogged check valve

Remove and clean check valve

Unit will not build pressure

Application requires excessive air demand

Reduce demand on compressor

 

Loose head

Tighten bolts on head

 

Blown gasket

Remove head and check for

 

 

broken or deformed gasket. Replace if needed.

Unit will not build pressure

Worn or broken valves

Remove head and replace valves.

Air leak at tank or air tank

Damaged air tank

 

 

 

welds.

 

 

 

DO NOT DRILL INTO , WELD OR OTHERWISE MODIFY AIR TANK.

 

 

 

 

 

DAMAGED OR MODIFIED TANKS CAN RUPTURE. REPLACE TANK IMMEDIATELY.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Avertissements Introduction IndexBe Educated Avoid Moving Parts Attachments and AccessoriesRules for Safe Operation Personal ProtectionVentilation Rules for Safe OperationAir Tank Risk of BurnsSafety Valve Electrical Grounding InstructionsCAP60P-OF Specifications Electrical Grounding InstructionsFeatures of the Bostitch CAP60P-OF General Maintenance Operation InstructionsLimited Warranty Trouble Shooting Guide Problem Probable Cause CorrectionÍndice IntroducciónNota Reglas Para EL Funcionamiento Seguro Ventilación Reglas Para EL Funcionamiento Seguro continuaciónTanques de aire Peligro de quemadurasInstrucciones DE Conexión Eléctrica a Tierra Válvula de seguridadCAP60P-OF Especificaciones Instrucciones DE Conexión Eléctrica a Tierra continuaciónCaracterísticas DEL Bostitch CAP60P-OF Instrucciones DE Operación Mantenimiento GeneralGarantía Limitada Guía Para Solucionar Problemas Problema Causa probable CorrecciónIndex RemarqueRenseignez-vous Embouts et accessoiresRègles Pour UNE Utilisation Sécuritaire Évitez les pièces mobilesVentilation Règles Pour UNE Utilisation Sécuritaire suiteRéservoirs d’air Risque de brûluresInstructions DE Mise À LA Terre Soupape de sûretéInstructions DE Mise À LA Terre suite CAP60P-OFCaractéristiques DU Bostitch CAP60P-OF Instructions D’UTILISATION Entretien GénéralGarantie Limitée Guide DE Dépannage Problème Cause probable

CAP60P-OF specifications

The Bostitch CAP60P-OF is a powerful and versatile pneumatic roof nailer designed to make roofing applications faster and more efficient. This tool is particularly favored by professional contractors and DIY enthusiasts for its robust design and advanced features that streamline nailing tasks while maintaining high accuracy and performance.

One of the standout characteristics of the CAP60P-OF is its lightweight yet durable construction. Weighing only 4.5 pounds, this nailer minimizes user fatigue during prolonged use, making it ideal for large roofing projects. The ergonomic design enhances maneuverability, allowing for easy operation in tight spaces and on steep roofs.

The CAP60P-OF is equipped with a powerful motor that delivers impressive nailing speed, driving up to 10 nails per second. This efficiency is crucial when working on time-sensitive roofing jobs, as it helps contractors complete their tasks quickly without sacrificing quality. The nailer is compatible with 1-1/4” to 2-1/2” roofing nails, providing versatility for various applications, from replacing shingles to installing underlayment.

A notable technology feature of the Bostitch CAP60P-OF is its adjustable depth control. This feature allows users to set the nail depth with precision, ensuring that nails are driven consistently at the desired depth for optimal performance and safety. Additionally, the tool's magazine can hold up to 120 nails, reducing downtime from frequent reloading.

Another significant technology incorporated in the CAP60P-OF is the selective actuation switch, which allows the operator to choose between sequential or contact nailing modes. This flexibility provides greater control over nailing operations, enabling users to adapt to different tasks on the fly.

The nailer also features a 360-degree adjustable exhaust, which directs air away from the user, enhancing comfort and visibility. Plus, it includes an anti-dry fire mechanism that prevents the tool from firing without nails, protecting both the tool and the working surface.

In summary, the Bostitch CAP60P-OF stands out as a leading choice in the pneumatic roofing nailer market. Its combination of lightweight design, adjustable depth control, high nailing speed, and user-friendly features make it a reliable tool for both professional and residential roofing applications. Whether you are a seasoned contractor or a weekend warrior, the CAP60P-OF offers the performance and versatility needed to tackle any roofing project efficiently.
Top Page Image Contents