chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety Code 25249.5 et seq.)
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE:
For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 11.
1.IMPORTANT! The following instructions are for acetylene gas use only. Contact your gas supplier for instructions on the use of other fuel gases.
2.Make sure to secure the cylinders (as noted in the Specific Safety Rules sec- tion).
3.While standing to one side, “crack” each cylinder valve. “Cracking” is to quickly open and close the valve, allowing gas to escape and clearing the valve of any
foreign material. | WARNING! If oil or grease is found, discontinue using | ||
cylinder and immediately contact your supplier. (See Figure A.) | |||
|
|
| |
QUICKLY |
| CYLINDER | |
| |||
OPEN/CLOSE |
| VALVE | |
VALVE TO |
| HANDLE | |
|
| ||
“CRACK”
ACETYLENE
OR
OXYGEN
CYLINDER
(NOT INCLUDED)
FIGURE A
4.Attach the GREEN Oxygen Hose (7) to the oxygen cylinder. Then, attach the RED Acetylene Hose (8) to the acetylene cylinder. Make sure they are tightened in the correct directions (normally, clockwise for oxygen and counterclockwise for acety- lene.) (See Figure B, next page.)
SKU 95671 | For technical questions, please call | PAGE 7 |