INSPECTION, MAINTENANCE, and Cleaning

1. WARNING! Make sure the Welding Torch Mini-Kit is cool to the touch and disconnected from its oxygen and acetylene cylinders before performing any inspection, maintenance, or cleaning procedures.

2.BEFORE EACH USE, inspect the general condition of the Welding Torch Mini-Kit. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged Welding Hoses (7, 8), and any other condition that may affect its safe operation. If a problem occurs, have the problem corrected before further use.

Do not use damaged equipment.

3.PERIODICALLY, use a Tip Cleaner (not included) to clean out dirt and debris from the Tips (1, 12, 13, 14, 15). Make sure to use the correct size Tip Cleaner for each individual Tip.

4.TO CLEAN, use a clean cloth. If necessary, a mild detergent may be used. Do not immerse any part of the Welding Torch Mini-Kit in liquid.

Do not use solvents or other flammable agents to clean the Welding Torch Mini-Kit.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 95671 For technical questions, please call 1-800-444-3353 PAGE 10