Grizzly G4173 1 8 HP Wheel Replacement, Brush Replacement, Tools Needed Qty, To replace a wheel

Wheel Replacement

If you damage one or more wheels, you can easily replace the wheels.

Tools Needed		Qty
•	Phillips Screwdriver #2	1
• Small Pin-Type Retaining Ring Pliers		1
•	Safety Glasses	1

To replace a wheel:

1.DISCONNECT THE POWER FEEDER FROM POWER!

2.Remove the three cover screws and the cover (Figure 20).

Figure 20. Wheel replacement.

3.Put on your safety glasses and remove the retaining ring (Figure 20), using external retaining ring pliers.

4.Replace the wheel and reassemble the power feeder.

-22-

Brush Replacement

After a long period of time you may notice the motor lose some power or begin to growl during operation. This indicates that the motor brushes are worn and need replacement. The brushes can be easily replaced.

Tools Needed		Qty
•	Standard Screwdriver #2	............................ 1
•	Safety Glasses	1

To replace the brush set:

1.DISCONNECT THE POWER FEEDER FROM POWER!

2.Unscrew both brush caps (Figure 21).

Figure 21. Brush set replacement.

3.Replace the brush set (Figure 21) and rein- stall the caps.

Model G4173 1⁄8 HP Power Feeder