RULES FOR SAFE OPERATION (Continued)

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes.

KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum- based products or any strong solvents to clean your tool.

STAY ALERT. Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this operator's manual.

DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.

DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication.

CUTTING INTO ELECTRICAL WIRING IN WALLS AND FLOORS CAN CAUSE THE BLADE AND METAL PARTS TO BECOME ELECTRICALLY LIVE. Do not touch metal parts when cutting into walls and floors; grasp only the insulated handle(s) provided on the tool. Make sure hidden electrical wiring, water pipes, and mechanical hazards are not in the blade path when cutting into a wall or floor.

INSPECT FOR and remove all nails from lumber before cutting.

DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

Your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F.

Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.

If carrying your battery tool at your side, make sure it is not running and your finger is not on the switch. Avoid accidental starting.

SECURE WORK before applying power. NEVER hold workpiece in your hand or across your legs.

WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for battery charger part numbers 1400667 and 1400677.

Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger.

WARNING:

To reduce risk of injury, charge only nickel-cadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

Do not expose charger to rain or snow.

Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

To reduce risk of damage to charger body and cord, pull by charger body rather than cord when disconnecting charger.

IMPORTANT SAFETY RULES FOR BATTERY TOOLS

Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in an operating condition. Be aware of possible hazards when carrying your battery tool, when making adjustments to it, or when changing accessories.

USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY TOOL. Do not substitute any other charger. Use of another charger could cause batteries to explode causing possible serious injury.

DO NOT PLACE BATTERY TOOLS OR THEIR BATTERIES NEAR FIRE OR HEAT. They may explode.

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b.That extension cord is properly wired and in good electrical condition; and

Page 4

Page 4
Image 4
Ryobi R10630 specifications Important Safety Instructions for Charger, Important Safety Rules for Battery Tools

R10630 specifications

The Ryobi R10630 is a standout model in the realm of power tools, particularly appealing to DIY enthusiasts and professionals alike. This versatile tool combines innovative technology with practical features, making it a valuable addition to any toolbox.

One of the main highlights of the Ryobi R10630 is its powerful motor. Equipped with a robust 10 amp motor, this tool delivers impressive performance for various applications, including cutting, sanding, and drilling tasks. The motor ensures that users can tackle tougher materials with ease, making it suitable for a wide range of projects.

Another significant feature of the R10630 is its lightweight design. Weighing in at just under eight pounds, this tool is easy to handle, reducing user fatigue during longer projects. The ergonomic design also enhances comfort, allowing for extended use without discomfort.

The Ryobi R10630 incorporates advanced technologies that elevate its functionality. The tool is equipped with an electronic speed control system, allowing users to adjust the speed settings easily, depending on the materials they are working with. This feature ensures that users achieve optimal results, whether they are working with softwoods, hardwoods, or metal.

Safety is also a priority in the design of the R10630. It includes a safety lock-off switch, preventing accidental operation, which is crucial for ensuring user protection during use. Additionally, the onboard LED work light illuminates the work area, providing better visibility and enhancing precision, especially in dimly lit spaces.

Durability is another significant characteristic of the Ryobi R10630. Crafted from high-quality materials, it is designed to withstand rigorous use over time. Its sturdy construction ensures longevity, making it a reliable tool that users can depend on for years to come.

The Ryobi R10630's versatility sets it apart from its competitors. With multiple attachments available, users can easily switch between tasks, ranging from sanding surfaces to making precise cuts. This adaptability makes it a favorite among both hobbyists and professionals who require a tool that can meet various demands.

Overall, the Ryobi R10630 brilliantly combines power, comfort, and adaptability. With its advanced features and robust construction, it stands out as a top choice for anyone looking to enhance their woodworking and DIY capabilities. Whether you are a seasoned professional or just starting, the R10630 proves to be an invaluable asset in achieving high-quality results.