SAW Blades, Blade Guard System, To Remove Blade

OPERATION

■Fit saw blade inside lower blade guard and onto spindle. NOTE: The saw teeth point upward at the front of saw as shown in figure 5.

■Replace outer blade washer.

■Depress spindle lock button, then replace blade screw. Tighten blade screw securely.

NOTE: Turn blade screw counterclockwise to tighten.

■Return blade wrench to storage area.

REMEMBER: Never use a blade that is too thick to allow the outer blade washer to engage with the flats on the spindle.

TO REMOVE BLADE:

■Remove battery pack from saw.

WARNING:

Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury.

■Remove blade wrench from storage area. See Figure 1.

■Position your saw as shown in figure 6, depress spindle lock button, and remove blade screw.

NOTE: Turn blade screw clockwise to remove.

■Remove outer blade washer. See Figure 5.

NOTE: Blade can be removed at this point.

SAW BLADES

The best of saw blades will not cut efficiently if they are not kept clean, sharp, and properly set. Using a dull blade will place a heavy load on your saw and increase the danger of kickback. Keep extra blades on hand, so that sharp blades are always available.

Gum and wood pitch hardened on blades will slow your saw down. Use gum and pitch remover, hot water, or kerosene to remove these accumulations. DO NOT USE GASOLINE.

BLADE GUARD SYSTEM

The lower blade guard attached to your cordless circular saw is there for your protection and safety. It should never be altered for any reason. If it becomes damaged or begins to return slow or sluggish, do not operate your saw until the damage has been repaired or replaced. Always leave guard in operating position when using saw.

DANGER:

When sawing through workpiece, lower blade guard does not cover blade on the underside of workpiece. Since blade is exposed on underside of workpiece, keep hands and fingers away from cutting area. Any part of your body coming in contact with moving blade will result in serious injury. See Figure 7.

SPINDLE

LOCK BUTTON

	50		BLADE
	45
3			SCREW
2	0		SCREW
2
3
2
	1	45
		45
		0	BLADE
		1

WRENCH

Fig. 6

LOWER BLADE GUARD

IS IN UP POSITION

WHEN MAKING A CUT

BLADE EXPOSED ON

UNDERSIDE OF WORKPIECE

Fig. 7

Never use saw when guard is not operating correctly. Guard should be checked for correct operation before each use. If you drop your saw, check the lower blade guard and bumper for damage at all depth settings before reuse.

NOTE: The guard is operating correctly when it moves freely and readily returns to the closed position. If for any reason your lower blade guard does not close freely, take it to the nearest Ryobi authorized service center for service before using.

Page 11

R10630 specifications

The Ryobi R10630 is a standout model in the realm of power tools, particularly appealing to DIY enthusiasts and professionals alike. This versatile tool combines innovative technology with practical features, making it a valuable addition to any toolbox.

One of the main highlights of the Ryobi R10630 is its powerful motor. Equipped with a robust 10 amp motor, this tool delivers impressive performance for various applications, including cutting, sanding, and drilling tasks. The motor ensures that users can tackle tougher materials with ease, making it suitable for a wide range of projects.

Another significant feature of the R10630 is its lightweight design. Weighing in at just under eight pounds, this tool is easy to handle, reducing user fatigue during longer projects. The ergonomic design also enhances comfort, allowing for extended use without discomfort.

The Ryobi R10630 incorporates advanced technologies that elevate its functionality. The tool is equipped with an electronic speed control system, allowing users to adjust the speed settings easily, depending on the materials they are working with. This feature ensures that users achieve optimal results, whether they are working with softwoods, hardwoods, or metal.

Safety is also a priority in the design of the R10630. It includes a safety lock-off switch, preventing accidental operation, which is crucial for ensuring user protection during use. Additionally, the onboard LED work light illuminates the work area, providing better visibility and enhancing precision, especially in dimly lit spaces.

Durability is another significant characteristic of the Ryobi R10630. Crafted from high-quality materials, it is designed to withstand rigorous use over time. Its sturdy construction ensures longevity, making it a reliable tool that users can depend on for years to come.

The Ryobi R10630's versatility sets it apart from its competitors. With multiple attachments available, users can easily switch between tasks, ranging from sanding surfaces to making precise cuts. This adaptability makes it a favorite among both hobbyists and professionals who require a tool that can meet various demands.

Overall, the Ryobi R10630 brilliantly combines power, comfort, and adaptability. With its advanced features and robust construction, it stands out as a top choice for anyone looking to enhance their woodworking and DIY capabilities. Whether you are a seasoned professional or just starting, the R10630 proves to be an invaluable asset in achieving high-quality results.

Ryobi R10630 specifications SAW Blades, Blade Guard System, To Remove Blade

Models: R10630