User’s Guide for the Polycom RealPresence Group Series
Recharging the Remote Control Battery
Your system setup sheet shows how to charge the battery in the remote control the first time. When the remote control battery power is at 10% or less, a notification is displayed on the home screen. Although other notifications override the low battery notification, the low battery notification returns after the other notifications are dismissed. The low battery notification is not displayed while the system is in a call.
The following steps describe how to recharge the battery.
To recharge the remote control battery:
1Pull the battery out of the end of the remote control.
2Insert the USB plug of the battery into a USB 2.0 port such as the one on your system.
The RealPresence Group 300 and RealPresence Group 500 systems have two USB 2.0 ports on the back of the system, while the RealPresence Group 700 has one USB 2.0 port on the front of the system and two USB 3.0 ports on the back of the system.
3Wait until the status light on the battery turns green before removing it from the port.
4Insert the charged battery into the remote control.
The following figure illustrates these steps.
If you have a RealPresence Group 700 system, you can also recharge the battery using the USB port on the front of the system.
Polycom, Inc. | 3 |
