Polycom P001 manual Hanging Up a Multipoint Call, Passwords for Multipoint Calls

User’s Guide for the Polycom RealPresence Group Series

3To place the call, press or the Select button.

Depending on how your system is configured, it attempts to call the site using a pre-defined list of call types. Contact your system administrator for more information.

To place a multipoint call using Contacts:

1Using your remote control, select > Place a Call or Add a Call and select Contacts.

2Highlight an entry in the Contacts list.

3To place the call, press or navigate to Call.

Depending on how your system is configured, it attempts to call the site using a pre-defined list of call types. Contact your system administrator for more information.

Hanging Up a Multipoint Call

To hang up an individual call in a multipoint call:

>>Using your remote control, navigate to the call that you want to hang up and press .

To hang up all calls in a multipoint conference call:

>>Using your remote control, navigate to Hang Up All.

Passwords for Multipoint Calls

You may be required to enter a meeting password to join a multipoint call. And you can require that far-end systems enter a meeting password to prevent unauthorized participants from joining multipoint calls hosted by your RealPresence Group system.

Points to note about passwords and multipoint calls:

•If you need to generate touch tones (DTMF tones) when you are in a call, press the # key on your remote control and a message displays “Touch tones are enabled.” Then use the number keys to enter numbers.

•SIP calls do not support meeting passwords. SIP endpoints calling into a multipoint call protected by a password may not be able to join the call.

22 Polycom, Inc.