BM 2609140642
CHARGER INDICATORS, SyMBOLS AND MEANING (Model BC660)
If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet.
If the green indicator light is
“ON”, the charger is plugged in but the battery pack is not inserted, or the battery pack is fully charged, or
the battery pack is too hot or cold for fast- charging. The charger will automatically switch
to
If the green indicator light is 
“BLINKING”, the battery pack is being
battery pack is fully charged.
CHARGING BATTERy PACK (Model BC660)
Plug charger cord into your standard power | As soon as the battery pack reaches the | ||
outlet. | correct temperature range, the battery charger | ||
With no battery pack inserted, the charger’s | will automatically switch to fast charging. | ||
|
| ||
green indicator light will go ON. This indicates | The battery pack may be used even though the | ||
the charger is receiving power and the charger | light may still be blinking. The light may require | ||
is ready for operation. | more time to stop blinking depending on | ||
When you insert the battery pack into the | temperature. | ||
|
| ||
charger, the charger’s green indicator light will | The purpose of the green light is to indicate that | ||
begin to “BLINK”. This indicates that the battery | the battery pack is | ||
is receiving a fast charge (Fig.8). | indicate the exact point of full charge. The light | ||
When the indicator light stops “BLINKING” (and | will stop blinking in less time if the battery pack | ||
was not completely discharged. | |||
becomes a steady green light) fast charging is | |||
|
| ||
complete. The battery pack is fully charged and | If the green indicator light is “ON”, the battery | ||
can be removed from the charger. | pack cannot accept a charge. | ||
When you begin the charging process of the | • Check to make sure the battery pack is | ||
battery pack, a steady green light could also | inserted into the charger properly. | ||
mean the battery pack is too hot or too cold. | • Clean the contacts of the charger or battery | ||
Fast charging is only possible when the | pack (e. g. by inserting and removing the | ||
temperature range of the battery pack is | battery several times) or replace the battery | ||
between 32˚F (0˚C) and 113˚F (45˚C). When | pack, as required. | ||
needed, the internal fan of the charger will turn | When the battery pack is fully charged, unplug | ||
on to aid the charging process and speed. | the charger (unless you're charging another | ||
| battery pack) and slip the battery pack back into | ||
| the tool. | ||
| BATTERY | ||
|
| PACK | |
|
| ||
CHARGER
