BM 2609140642
Assembly
Disconnect battery pack ! WARNING from tool before making
any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.
INSERTING AND REMOVING
ACCESSORIES
(Models 25614 & 25618 only)
To avoid loss of control, ensure bit is locked in chuck
by pulling on bit after it has been inserted.
The chuck accepts only standard 1/4" hexagonal shank accessories with power groove.
Your tool is equipped with a quick release chuck. To insert an accessory, simply pull locking sleeve forward, insert desired accessory into chuck and release locking sleeve (Fig. 2).
To remove an accessory, pull locking sleeve forward and simply remove it from the chuck.
FIG. 2 | LOCKING SLEEVE |
CHUCK
SCREWDRIVER |
BIT |
BIT HOLDER
SCREWDRIVER BIT
INSERTING AND REMOVING
ACCESSORIES
(Models 24614, 24618, IWH141 & IWH181 only)
Attach only high quality accessories with the proper size square drive designed for use with impact wrenches.
(Models 24614 & 24618)
Your impact wrench is equipped with a 1/2" square drive.
(Models IWH141 & IWH181)
Your impact wrench is equipped with a 3/8" square drive.
To install a socket, simply push completely onto output drive. To remove, pull off output drive (Fig. 3).
FIG. 3
SOCKET
OUTPUT
DRIVE
Operating Instructions
INTENDED USE
This tool is intended for the fastening and loosening of bolts, nuts and various threaded fasteners. This tool is not intended for use as a drill.
VARIABLE SPEED CONTROLLED
TRIGGER SWITCH
Your tool is equipped with a variable speed trigger switch. The tool can be turned "ON" or "OFF" by squeezing or releasing the trigger.
The speed can be adjusted from the minimum to maximum nameplate RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed (Fig. 1).
BRAKE
When the trigger switch is released it activates the brake to stop the chuck quickly. This is especially useful in the repetitive driving and removal of screws.
