Hobart Welding Products H-9B Gun manual 10 mm

Page 14

5-3. Replacing Gun Liner (Continued)

When liner exits cable at gun handle, guide liner into head tube. Continue to push liner until it exits end of head tube.

13/16 in (21 mm)

8 mm

Insert retaining nut into adapter, and adjust liner stickout as shown. Tighten retaining nut. Reinstall cable end into drive housing with retaining grooves inserted into the two retaining ribs. Be sure to position gas hose up. Position liner in groove so that end is flush with back of groove, adjust if necessary

3/8 in (10 mm)

Be sure that cable is straight. Tighten liner setscrew. Cut liner so that 3/8 in (10 mm) sticks out of head tube. File down any sharp points on liner after cutting to length.

Reassemble gun by placing head tube and cable into one half of handle. Be sure trigger is properly installed into trigger slot.

8 mm

Thread welding wire through gun (see Section 3-5). Reinstall adapter, contact tip, and nozzle.

Reinstall cover onto wire drive assembly, and secure with screws (3).

Place other half of handle over head tube and cable.

Slide locking rings over top and bottom of handle, and secure by twisting rings clockwise 1/4 turn.

OM-225 333 Page 10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 2006−06 From Hobart to You Table of Contents Page Fcaw And Gmaw Gun Hazards Symbol UsageMarks a special safety message EMF Information About PacemakersSpecifications − Safety Information− Installation Duty Cycle And OverheatingInstalling Gun Into Welding Power Source Turn off welding power sourceInstalling Contact Tip And Nozzle Flux NozzleThreading Welding Wire Input Power− Operation Operating The GunReplacing Gun Contact Tip − Maintenance & TroubleshootingCleaning Gun Liner Replacing Gun Liner Loosen liner setscrew10 mm Replacing Switch/Handle Removing Gun From Welding Power Source Troubleshooting Routine MaintenanceEach Spool Of Wire Gized wire feeds unevenly− Parts List PkgAssistance ServiceSupport Owner’s Record

H-9B Gun specifications

Hobart Welding Products has established itself as a trusted name in the welding industry, known for producing high-quality equipment that meets the diverse needs of welders. Among its lineup of products, the Hobart Welding Products H-9B Gun stands out as a reliable and efficient choice for various welding applications.

The H-9B Gun is designed specifically for MIG welding, making it a perfect tool for both professional welders and hobbyists alike. One of its notable features is its ergonomic design, which minimizes user fatigue during prolonged use. The lightweight construction enables welders to work comfortably, providing excellent maneuverability without sacrificing power or control.

A key characteristic of the H-9B Gun is its robust build quality. Constructed with high-grade materials, this welding gun is designed to withstand the demanding conditions often encountered in welding environments. The durable components ensure a long service life, making the H-9B Gun a cost-effective investment for those who require reliable welding equipment.

In terms of technology, the H-9B Gun integrates advanced cooling capabilities that help manage heat during operation. This feature is vital as excessive heat can lead to equipment damage and subpar welds. The cooling system enhances the overall performance of the gun, ensuring that it delivers consistent weld quality throughout prolonged use. The gun also boasts excellent wire feed capabilities, which are essential for achieving smooth and precise welds.

Another notable characteristic of the H-9B Gun is its versatility. The gun is compatible with a range of wire sizes, making it suitable for various welding projects. Whether working on thin sheet metal or heavier materials, the H-9B Gun can adapt to the specific requirements of the job, making it a valuable tool for welders in different industries.

Furthermore, the H-9B Gun features a quick-change nozzle system, which streamlines maintenance and decreases downtime on the job. This design allows for easy replacement of consumables, ensuring that welders can keep their focus on the task at hand without unnecessary interruptions.

Overall, the Hobart Welding Products H-9B Gun encapsulates quality, comfort, and performance in a MIG welding tool. With its user-friendly design, durable construction, and innovative technologies, the H-9B Gun is an essential asset for those looking to achieve optimal welding results. Its reliability and efficiency make it a preferred choice for welders committed to excellence in their work.
Top Page Image Contents