Black & Decker BDCMTTS-XE manual TROuBLEShOOTING, TrimSaw, Original instructions English

Page 11

(Original instructions) ENGLISH

TROuBLEShOOTING

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Attachment is not secured.

• Make certain the attachment is fully

 

 

pushed into the Power Unit.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

wARNING: The use of any accessory not recommended for use with this tool could be hazardous. Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-444-224

Technical data

when operate with 18V MATRIX unit

TrimSaw

BDCMTTS-XE

no-load speed

0-3400/min RPM

 

 

Weight

729g

 

 

11

Image 11
Contents Quick Connect System 8 INCh 86 mm TRImSAw ATTAChmENTParts and Features Original instructions General power tool safety warningsCauses and Operator Prevention of Kickback LOWER Guard SAFETy InstructionsEnglish To Reduce the Risk of Kickback SyMBOlSLOWER BlADE Guard ASSEMBly/ADjUSTMENT SET-UP Attaching and Removing the BlADEAlways secure work to prevent workpiece movement during cut Supporting lARGE PANElS / Securing WorkpieceOperation Parts and FeaturesGENERAl Cuts BlADE SElECTIONOriginal instructions English TROuBLEShOOTINGProblem Possible Cause Possible Solution TrimSawAustralia & New Zealand