For technical questions, please call | Chicago Electric 98753

c. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the welder. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entan- gled cords increase the risk of electric shock.

d.When operating a welder outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

e.If operating a welder in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are do- ing and use common sense when operating a welder. Do not use a welder while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating welders may result in serious personal injury.

b.Use personal protective equip- ment. Always wear eye protection. Safety equipment such as welding mask, non-skid safety shoes, and welding apron used for appropriate conditions will reduce personal inju- ries.

c.Prevent unintentional starting. En- sure the switch of the stick welder is in the off-position before con- necting to power source, picking up or carrying the tool.

d.Do not overreach. Keep proper footing and balance at all times.

This enables better control of the welder in unexpected situations.

e.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

f. Only use safety equipment that has been approved by an appropri- ate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breath- ing protection must be NIOSH-ap- proved for the specific hazards in the work area.

4.Welder use and care

a.Do not force the welder. Use the correct welder for your application.

The correct welder will do the job bet- ter and safer at the rate for which it was designed.

b.Store idle welders out of the reach

of children and do not allow per- sons unfamiliar with the welder or these instructions to operate the welder. Welders are dangerous in the hands of untrained users.

c. Maintain welders. Check for mis-

alignment or binding of moving parts, breakage of parts and any other condition that may affect the welder’s operation. If damaged, have the welder repaired before use. Many accidents are caused by poorly maintained welders.

d.Use the welder, accessories and tool bits etc. in accordance with these instructions, taking into ac- count the working conditions and the work to be performed. Use of

SKU 98753

For technical questions, please call 1-800-444-3353.

Page 3

98753 specifications

The Chicago Electric 98753 is a versatile and powerful tool designed for both professional and DIY enthusiasts looking for robust and reliable performance in various cutting tasks. This tool stands out due to its high efficiency and a range of features tailored to enhance usability, safety, and precision.

One of the main features of the Chicago Electric 98753 is its strong motor, which delivers ample power to handle heavy-duty projects. With a wattage rating typically around 1500 watts, this tool can cut through materials like wood, metal, and plastic with ease, making it a valuable addition to any workshop. The adjustable speed feature allows users to select the appropriate speed for different materials, providing flexibility and control.

In terms of design, the Chicago Electric 98753 prioritizes user comfort. It includes an ergonomic handle that reduces fatigue during prolonged use, which is especially important for lengthy projects. The lightweight construction further enhances maneuverability, allowing users to easily navigate tight spaces and complex angles.

The tool is equipped with advanced safety features, including a blade guard that prevents accidental contact and a safety switch to prevent unintentional activation. These features ensure that users can operate the tool with confidence, reducing the risk of injuries.

Technologically, the Chicago Electric 98753 often incorporates laser guides for improved accuracy. This feature projects a precise line onto the material, helping users align their cuts perfectly. This is particularly beneficial for detailed work where precision is crucial.

In addition to its cutting capabilities, the Chicago Electric 98753 typically offers compatibility with a wide range of blades, allowing users to customize the tool for specific tasks. This adaptability means it can easily transition from woodworking to metalworking, making it a multifunctional option for diverse projects.

Overall, the Chicago Electric 98753 is characterized by its powerful motor, user-friendly design, safety features, and versatility, making it an excellent choice for anyone in need of a reliable cutting solution. Whether for home improvement tasks or professional applications, this tool provides the quality and performance users expect from the Chicago Electric brand. It has quickly garnered a reputation as a dependable workhorse in both casual and dedicated workshops alike.