Save This Manual
Keep this manual for the safety warn ings and precautions, assembly, operat ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Important SAFETY
Information
In this manual, on the labeling, and all other information provid- ed with this product:
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will result in death or serious injury.
WARNING indicates a
hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety
alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices not related to personal injury.
General Welder Safety Warnings
WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1.Work area safety
a.Keep work area clean and well lit.
Cluttered or dark areas invite acci- dents.
b.Do not operate welders in explo- sive atmospheres, such as in the presence of flammable liquids, gases or dust. Welders create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a welder. Distractions can cause you to lose control.
2.Electrical safety
a.Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
b.Do not expose welders to rain or wet conditions. Water entering a welder will increase the risk of electric shock.
SKU 98753 | For technical questions, please call | Page 2 |