Chicago Electric 98759 operating instructions Gfci reduces the risk of electric shock

Page 3

b.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

c. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

d.When operating a power tool out- doors, use an extension cord suit- able for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

e.If operating a power tool in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of

a GFCI reduces the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are do- ing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b.Use personal protective equip- ment. Always wear eye protection.

Safety equipment such as welding mask, non-skid safety shoes, and welding apron used for appropriate conditions will reduce personal inju- ries.

c.Prevent unintentional starting. En- sure the switch of the stick welder is in the off-position before con-

necting to power source, picking up or carrying the tool.

d.Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

e.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

f. Only use safety equipment that has been approved by an appropri- ate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breath- ing protection must be NIOSH-ap- proved for the specific hazards in the work area.

4.Power tool use and care

a.Do not force the power tool. Use the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to oper- ate the power tool. Power tools are dangerous in the hands of untrained users.

c. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If dam- aged, have the power tool repaired before use. Many accidents are

SKU 98759

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Spot welder Save This Manual General Power Tool SafetyGfci reduces the risk of electric shock Spot Welder Safety Warnings Electrical Safety For technical questions, please call Specifications UnpackingOperating Instructions Symptom Cause Solution TroubleshootingCleaning, Maintenance, Lubrication Maintenance ServicingDiagram Parts ListLimited 90 DAY Warranty

98759 specifications

The Chicago Electric 98759 is a well-regarded tool in the realm of woodworking and metalworking, designed for both amateur and professional users seeking efficiency and precision in their projects. As a versatile solution, this tool stands out due to its robust features and innovative technologies.

One of the main characteristics of the Chicago Electric 98759 is its powerful motor, which ensures consistent performance even in the most demanding applications. The motor is engineered to deliver high torque, enabling users to tackle a variety of materials with ease, whether it be wood, plastic, or metal. The tool is ideal for tasks such as cutting, shaping, and smoothing, making it a staple in workshops and garages.

In terms of design, the Chicago Electric 98759 is built with user comfort in mind. It features an ergonomic handle that provides a secure grip, which reduces fatigue during extended use. The well-balanced structure allows for greater control, enhancing precision and accuracy when working on intricate projects.

The incorporation of advanced technology is another hallmark of the Chicago Electric 98759. It often includes adjustable speed settings, allowing users to customize the speed according to the material being worked on. This feature is particularly useful for tasks that require careful handling, such as routing, sanding, or finishing.

Moreover, the Chicago Electric 98759 typically has a quick-change accessory system, facilitating easy swaps between various attachments. This efficiently expands the tool’s functionality, allowing users to switch from one application to another swiftly.

Durability is also key in the design of the Chicago Electric 98759. Constructed from high-quality materials, this tool is built to withstand the rigors of daily use. With proper care, it can serve users for years, maintaining its performance and reliability.

Overall, the Chicago Electric 98759 combines power, versatility, and user-centric design, making it an excellent choice for anyone looking to enhance their woodworking or metalworking capabilities. Its array of features and modern technology positions this tool as a go-to option for professionals and hobbyists alike, keen on achieving exceptional results in their projects.