Oneida Air Systems 2005c3HP manual Accessories, BAG Gripper

Page 12

X. Accessories

Bin Level Monitor - Provides level sensing for dry bulk solids. The monitor operates by using a 1 rpm synchronous motor to rotate a paddle. When paddle rotation is impeded by material surrounding it, the motor is de-energized and triggers a SPDT snap switch. The snap switch can be used in conjunction with a motor starter to turn equipment off or provide alarm functions.

Magnetic Motor Starters - The 3hp high pressure dust collectors do not come wired or with an on/off switch. Because of the voltage and amperage requirements of the system, an industrial switch must be used.

OAS offers Square “D” Full Voltage Non-Reversing across the Line Starters, Nema Type 1 Enclosure with Start/Stop in cover, and class 10 overload. Industrial switches can also be purchased through your local electrician. Due to varying electrical codes, OAS cannot specify exact wiring requirements. When wiring the collector you should always hire a licensed electrician.

The BAG Gripper

ABX000000

The BAG Gripper provides the ability to use convenient plastic bags inside your dust drum. It provides a constant, negative pressure on the outside surface of the plastic bag that keeps it pulled tight against the sides of the dust drum. Can be used with 35 and 55 gal. barrels. Must be wired into your system.

Dust Bin Options - (Must Order Custom Mounting Stand.)

1. Multiple Drums -

Custom order the System Mounting Stand for multiple drums or hoppers. Stand widths will vary depending on dust container.

2. Hoppers -

Large capacity hoppers from .5 cu. yd. to 3 cu. yd.

3/16” reinforcing angle for added support - 3/16” plate body is 100% continuously MIG welded on inside - 3/8” rear cross brace angle (not 3/16”) - three 3” base channel - All angles are structural not formed.

3. Air Locks -

Rotary air locks provide an alternative to an air tight dust bin for larger volume capacity and less maintenance.

Example - A 10” air lock will drop 1.85 cu. ft. / rev. of material.

11

3HP High Vacuum Owner’s Manual c O.A.S. 2005

Image 12
Contents 3HP Table of Contents System Start-Up Information II hp High Vacuum Configuration III. General Specifications & Fan Performance Curves IV. Dimensions For Twin 55 Gal. Barrel Measurements SeeAngle Iron Stand VI. Assembly Instructions On nextVII. Fan / Blower Maintenance VIII. Filter Maintenance External Filter Cartridge Cleaning IntervalsIX. Single and Three Phase Wire Diagram Wiring should always be done by a licensed electricianAccessories BAG GripperXI. Troubleshooting Motor OverheatingPoor Dust Pick-Up at Woodworking Machines Filter CloggingXII. Fire Hazards Read Before Installing and Operating Oneida Collectors are designed for Wood Dust onlyLimited Warranty XIII. Terms and ConditionsChecking in Order Delivery Risk of Loss