Oneida Air Systems 2005c3HP manual Angle Iron Stand

Page 7

V. Angle Iron Stand

30 7/8”

75 7/8”

Bolt together the stand using the cross bars and 3/8” x 1” bolts. Note: the cross bar on the cyclone stand goes in the back so that the dust bin can slide out.

6

3HP High Vacuum Owner’s Manual c O.A.S. 2005

Image 7
Contents 3HP Table of Contents System Start-Up Information II hp High Vacuum Configuration III. General Specifications & Fan Performance Curves For Twin 55 Gal. Barrel Measurements See IV. DimensionsAngle Iron Stand On next VI. Assembly InstructionsVII. Fan / Blower Maintenance External Filter Cartridge Cleaning Intervals VIII. Filter MaintenanceWiring should always be done by a licensed electrician IX. Single and Three Phase Wire DiagramBAG Gripper AccessoriesFilter Clogging XI. TroubleshootingMotor Overheating Poor Dust Pick-Up at Woodworking MachinesOneida Collectors are designed for Wood Dust only XII. Fire Hazards Read Before Installing and OperatingDelivery Risk of Loss Limited WarrantyXIII. Terms and Conditions Checking in Order