Base |
|
Components and Hardware Needed: | Qty |
Base | 1 |
Casters | 4 |
Flange Bolts | 16 |
Tools Needed: |
|
Wrench or Socket 12mm | 1 |
To assemble the dust collector base: |
|
1.Position the base upside down.
2.Secure the casters into the mounting brack- ets under the base with the flange bolts (Figure 7).
Figure 7. Caster installed on the base
mounting bracket.
Motor and Impeller
Components and Hardware Needed: | Qty |
Base | 1 |
Motor and Impeller | 1 |
Flange Bolts | 4 |
Tools Needed: |
|
Wrench or Socket 12mm | 1 |
To assemble the motor and impeller: |
|
1.Flip the base over on the casters and locate the mounting holes for the motor and impeller.
2.Position the motor and impeller on the base and secure them with the flange bolts (Figure 8).
Figure 8. Motor and impeller attached to base.
G0548 2 HP Dust Collector |