Grizzly instruction manual Flex-hose grounded to machine G0548 2 HP Dust Collector

Page 22

Be sure that you extend the bare copper wire down all branches of the system. Do not forget to connect the wires to each other with wire nuts when two branches meet at a ÒYÓ or ÒTÓ connec- tion.

Ensure that the entire system is grounded. If using plastic blast gates to direct air flow, the grounding wire must be jumped (Figure 22) around the blast gate without interruption to the grounding system.

Plastic Blast Gate

Copper Ground Wire

Metal Duct

 

Figure 22. Ground jumper wire when using

plastic blast gates and metal duct.

We also recommend wrapping the outside of all plastic ducts with bare copper wire to ground the outside of the system against static electrical build up. Wire connections at YÕs and TÕs should be made with wire nuts.

Attach the bare ground wire to each stationary woodworking machine and attach the dust collec- tor frame with a ground screw as shown in Figure

23.Ensure that each machine is continuously grounded to the grounding terminal in your elec- tric service panel.

Ground Screw

Flex-Hose

External Ground Wire

Internal Ground Wire

Figure 23. Flex-hose grounded to machine.

 

 

 

 

 

 

 

 

 

 

 

 

-20-

G0548 2 HP Dust Collector

Page 21 Page 23
Image 22
Page 21 Page 23
Contents HP Dust Collector Page Table of Contents Safety Safety Instructions for Power ToolsLength AMP Rating 25ft 50ft 100ftAdditional Safety For Dust Collectors General Information CommentaryCircuit Breaker Circuit RequirementsAmperage Draw Plug-Type Amperage DrawGrounding Circuit Capacity Extension CordsMachine Features Inventory SET UPUnpacking Box 1 Canister Filter Components FigureBox 2 Main Components Figure Hardware Recognition Chart Clean Up Site Considerations Working ClearancesBase Motor and ImpellerOutlet To install the metal L outletTo install the canister support brace Canister SupportCollector Ring To install the collectorTo install the canister Canister FilterTo install the collection bag Collection BagTo install the inlet InletGeneral Collection SystemMaterial Selection System Grounding Plastic DuctFlex-hose grounded to machine G0548 2 HP Dust Collector Design Suggestions BirdÕs eye planning view G0548 2 HP Dust CollectorOperation Test RunBag and Canister Cleaning MaintenanceLubrication To clean the canister filters To empty the collection bagReference Info Machine Data Sheet G0548 Dust Collector Parts H5783 Canister Filter Parts G0548 Parts List Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog

G0548 specifications

The Grizzly G0548 is a versatile and reliable dust collection system that is designed specifically for woodworkers and hobbyists who require efficient and effective dust management in their workshops. This machine is a vital addition to any serious workshop, helping to maintain a clean and safe working environment by effectively capturing wood chips and airborne dust.

One of the standout features of the Grizzly G0548 is its powerful motor. Equipped with a robust 1 HP motor, this dust collector provides ample suction power to handle even the most demanding dust collection tasks. With a maximum airflow of up to 1,250 CFM (cubic feet per minute), it ensures that dust is efficiently extracted from various machines, such as routers, table saws, and planers. This powerful airflow not only keeps the workspace clean but also helps in protecting the health of the user by reducing exposure to harmful wood particles.

The Grizzly G0548 comes with a 5-micron filtration bag that traps even the finest dust particles, allowing for cleaner air circulation in the workshop. The easy-to-change bag system ensures that maintaining the dust collector is a straightforward process, making it accessible for users of all skill levels. Additionally, an optional HEPA filter can be integrated for those seeking even higher levels of filtration, further enhancing the machine's effectiveness in dust collection.

Another significant aspect of the G0548 is its compact design, which makes it ideal for smaller workshops where space optimization is crucial. Its stable base and durable construction provide reliability and longevity, making it a practical investment for any woodworking setup.

In terms of mobility, the Grizzly G0548 features swivel casters that allow for easy maneuverability around the shop. This feature enables woodworkers to position the dust collector conveniently near various tools and machines to maximize efficiency.

For those looking to connect the dust collector directly to multiple machines, the G0548 includes a 4-inch intake port. This port allows for easy attachment to standard dust collection hoses, making it adaptable to different setups and configurations.

Overall, the Grizzly G0548 dust collector stands out for its powerful motor, efficient filtration system, compact design, and user-friendly features, making it an essential tool for any woodworking enthusiast aiming to create a cleaner and safer workshop environment. With its combination of technology and practicality, this dust collector is designed to enhance productivity and ensure superior dust management.
Top Page Image Contents