Makita 420S instruction manual Cord hook, Cleaning lever, Emptying out dust and dirt

Page 7

Cord hook

Use the convenient cord hook as shown a t right to prevent the power tool cord from dangling around your legs. Your legs may get tangled with the dangling cord, causing severe injury to you.

Cleaning lever

A clogged filter causes poor suction per- formance and potential damage to the motor. Occasionally use the cleaning lever to clear the dust from the filter. If suction performance becomes poor, move the cleaning lever back and forth about ten times after turning off the dust collector. Suction performance will recover.

Cord hook

Cleaning lever

CAUTION :

Never apply excessive pressure to the cleaning lever. It may be broken.

Emptying out dust and dirt

CAUTION :

Always switch off and unplug the dust collector before emptying out dust and dirt.

Move the cleaning lever back and forth

 

about ten times to clear the dust from the

 

filter. Unbuckle and open the dust com-

 

partment cover. Empty the contents of the

 

dust compartment. Always close the dust

 

compartment cover securely with a little

Dust commrt-’

click after emptying out dust and dirt.

Hook

This dust collector is equipped with a con- venient large hook. Use it for hanging the dust collector from a beam, scaffold, etc. However, never hang the dust collector in slippery or insecure places. The dust col- lector may fall. This will cause damage to the dust collector and/or injury to you or somebody else.

Image 7
Contents Dust Collector Safety Instructions Page Grounding Instructions Attaching shoulder strap and waist belt Installing hoseOverload protector OperationCord hook Cleaning leverEmptying out dust and dirt Maintenance Accessories BO5000 Dust Collector Description Useo ~MACHINE 11-8, Sumiyoshi-cho Anjo, Aichi 446 Japan