Marantz PV5580, PV6080 manual Using PIP with the Remote Control, Press the PIP ON/OFF D1

USING PIP WITH THE REMOTE CONTROL

By using the PIP buttons (D1 - D7) on the remote (LCD PIP

Display) the PIP picture can be moved and swapped with the main TV screen. The main screen picture can also be frozen in the PIP window.

BEGIN

Press the PIP ON/OFF (D1)

button to show the PIP picture.

PIP appears in a corner of TV screen. Press PIP ON/OFF again to remove PIP from the main screen.

With PIP on the TV screen, press the SWAP (D2) button to swap the main screen picture with the PIP picture. See "Smart Help" note on this page.

Press FREEZE (D3) to hold the current MAIN screen picture in the PIP window (Main picture is still active).

If PIP is currently OFF, the PIP window will automatically appear.

Press FRZ repeatedly to update the frozen PIP with current pictures from the Main screen.

You cannot reposition a frozen PIP picture.

Press the PIP ON/OFF button to drop the frozen PIP picture from the screen.

Press the PIP POSITION (D4)

button to move the PIP picture (from corner-to-corner on the TV screen.)

This feature allows you to move PIP and avoid blocking off any main screen action.

Press the PIP SOURCE (D7)

button to change the signal input source (ANT B, etc.) for the PIP window shown on the TV screen.

Press the PIP CH(annel) Up (+) and Down (-) (D5 and D6) buttons to select channels shown within the PIP window (when an antenna/cable signal source is connected for use with PIP).

	SMART
	HELP
	Remember,
	if the TV’s Main
1. PIP ON / OFF	screen picture is
	being supplied by
	an AUX VIDEO
	connected VCR (or
	other external
	accessory source);
	and then both the
	TV and VCR are
	turned OFF, a blank
	screen will appear
	when the TV is
	turned back ON
	again.
	If this happens, just
2. PIP SWAP	reselect the TV’s
	ANT A source
	mode to return to
	normal TV viewing.

						3. PIP FREEZE
								PIP SOURCE SELECT
								ANT A
								ANT B
								AUX 1 VIDEO
								AUX 2 VIDEO
								AUX 2 VIDEO
							4. PIP POSITION	SIDE VIDEO
				POWER
				SOUR
			ON
2		MACRO	LEARNING REMOT1 L			MACRO
		1		RC - 18SR			3
						LIGHT
		2					4
		D1				D5
		D2				D6		5. PIP SOURCE & PIP CH UP/DN
		D3				D7
3		D4				D8
								Note: Use the CH(annel) + and CH - (D5
							5	and D6) buttons on the remote display to
		VCR2	TV	LD	DVD	VCR1		change the channels within the PIP window.
	4	DSS/
		TUNER	CD	TAPE	AUX	CD-R
						/MD
		CH				VOL

1 2 3

4 POSITION5 6 OK

7 8 9

AMP GUIDE MUTE

M 0 C

46