WARNING
Read and understandthe entire contents of this manual before attempting assembly or operation of the dust collector!
Failure to comply may cause serious injury!
Unpacking
1. Remove all contents from the shipping carton.
2. Report any damage to your distributor.
3. Do not discard any shipping material until after the dust collector has been assembled and is running properly.
Contents of the Shipping Cartons
Canister Filter Box
1. Canister Filter
1. Handle
1. Bag of Hardware for Handles
2. M10 Hex Nuts
2. M10 Flat Washers
1. M10 Lock Washer
4. Knobs
1. Base
1. Owner's Manual
1. Warranty Card
1. Motor/Fan Assembly
5. Collector Bags
1.Snap Rings
2.Ring Clamps
4. Casters
1. Inlet Port & Inlet Caps
3. Support Legs
1. Housing
1.Bag of Assembly Hardware 16. M8 x 16 Hex Cap Bolts
34. M8 Flat Washers
8.M6 x 12 Pan Head Flange Bolts
10.M8 Hex Nuts
Tools Required for Assembly
2. 13mm Wrenches or Sockets
1. 14mm Wrench or Socket
1. #2 Cross Point Screw Driver
1.17mm Wrench
5