Jet Tools DC-1100G Filter Bag Installation DC-1100A/RC, Collector Bag Installation DC-1100A/RC

Page 11

Filter Bag Installation – DC-1100A/RC

Referring to Figure 7:

1.Place the hanger (A) on the hanger bracket (B).

2.Slide the filter bag loop (C) over the hanger hook.

3.Thread the retainer strap (D) through the loops on the filter bag (E) and fasten to the collector housing (F).

Collector Bag Installation – DC-1100A/RC

Referring to Figure 8:

4.Insert the ring of the collector bag (A) at an angle into the housing (B) through the opening at the bottom. Pull down on the bag to make sure it “seats” in the housing.

5.Position the plastic window in front so that you can easily see when the collector bag is full.

After completing the filter bag and collector bag installation, proceed to Electrical Connections.

11

Figure 7

Figure 8

Image 11
Contents Dust Collector More Information WMH Tool Group Warranty Warranty and ServiceTable of Contents Page Page Introduction SpecificationsOrdering Replacement Parts DC-1100A/RC Dust Collector Contents of the Shipping CartonTools Required for Assembly UnpackingDC-1100C/RC Dust Collector Tools Required for Assembly 2 13mm Wrenches or SocketsBase AssemblyMotor and Fan Assembly Hose Connector HousingCollector Bag Installation DC-1100A/RC Filter Bag Installation DC-1100A/RCCanister Filter Assembly and Installation DC-1100C/RC Collector Bag Installation DC-1100C/RCDC-1100A and DC-1100C Setting the TimerElectrical Connections Turning the Machine On & OffMaintenance Index No. Part No Description Size Qty Parts List DC-1100A/RC Dust CollectorParts Breakdown DC-1100A/RC Dust Collector TS-1482021 Filter Assembly for DC-1100C/RC ModelsRemote Control Breakdown for DC-1100RC Wiring Diagram DC-1100A/C Wiring Diagram DC-1100RC