Jet Tools DC-1100G Unpacking, DC-1100A/RC Dust Collector, Contents of the Shipping Carton

Page 7

Unpacking

DC-1100A/RC Dust Collector

1.Remove all contents from the shipping carton.

2.Report any damage to your distributor.

3.Do not discard any shipping material until after the dust collector has been assembled and is running properly.

Contents of the Shipping Carton

1 – Upper Bag Hanger

1 – Base

1 – Housing

1 – Hanger Bracket

1 – Owner's Manual

1 – Hose

1 – Warranty Card

1 – Motor/Fan Assembly

1 – Collector Bag

1 – Filter Bag

2 – Hose Clamps

1 – Retainer Strap

4 – Casters

1 – Inlet Port & Inlet Cap

3 – Support Legs

1 – Bag of Assembly Hardware

(16)M8 x 16 Hex Cap Screws

(22)M8 Flat Washers

(8)M6 x 12 Pan Head Flange Screws

(6)M8 Hex Nuts

Tools Required for Assembly

2 – 13mm Wrenches or Sockets

1 – 14mm Wrench or Socket

Bag of Assembly Hardware

1 – #2 Cross Point Screw Driver

1 – 17mm Wrench

Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury.

7

Image 7
Contents Dust Collector More Information WMH Tool Group Warranty Warranty and ServiceTable of Contents Page Page Ordering Replacement Parts SpecificationsIntroduction DC-1100A/RC Dust Collector Contents of the Shipping CartonTools Required for Assembly UnpackingDC-1100C/RC Dust Collector Tools Required for Assembly 2 13mm Wrenches or SocketsMotor and Fan Assembly AssemblyBase Hose Connector HousingCollector Bag Installation DC-1100A/RC Filter Bag Installation DC-1100A/RCCanister Filter Assembly and Installation DC-1100C/RC Collector Bag Installation DC-1100C/RCDC-1100A and DC-1100C Setting the TimerElectrical Connections Turning the Machine On & OffMaintenance Index No. Part No Description Size Qty Parts List DC-1100A/RC Dust CollectorParts Breakdown DC-1100A/RC Dust Collector TS-1482021 Filter Assembly for DC-1100C/RC ModelsRemote Control Breakdown for DC-1100RC Wiring Diagram DC-1100A/C Wiring Diagram DC-1100RC