Dixon 114863 - DCK3 manual Caring For Hoses

Page 16

SERVICE AND MAINTENANCE

Caring For Hoses

Caring For Bags

1.Inspect hoses before each use. If hoses have excessive wear, tears, or punctures, replace immediately.

2.To prolong the life of the hose, periodically ro- tate hose and turn hose end to end. Refer to Preventative Maintenance Schedule in this manual.

3.Avoid twists and sharp turns in the hoses, as they will increase wear on the hoses.

4.Avoid dragging the lower hose along the sides of buildings or other hard surfaces.

Inspect the bags before each use. If bags have excessive wear, tears or punctures, replace im- mediately.

Cleaning Instructions

NOTE: Under normal usage the bag material is subject to deterioration and wear.

Cleaning Poly Mesh

The poly mesh on the collection system is located inside the container hood. For best results, clean poly mesh regularly.

Cleaning Instructions

1.Shut off engine.

2.Release the two (2) rubber latches under the rear of the hood. Open hood and brush debris off of both sides.

3.Close hood and re-latch.

DO NOT USE THE COLLECTION SYSTEM WITHOUT POLY MESH SECURELY IN PLACE.

16

Image 16
Contents Collection System Operators Manual Page Dixon. All Rights Reserved Index Operators GuideFeatures & Controls Safety Rules General InformationOperation Assembly Unpacking InstructionsLanyard Hood Assembly Hood Hinge Hood Assembly Blower/Drive Kit Wing NUT Washer Belt Guard Operation Operating the Collection SystemService and Maintenance TransportCaring For Hoses Troubleshooting Guide Spindle Drive Assembly Parts Illustrations Hood Assembly QTY Description Hitch Assembly Hitch Blower KIT HUB, BEARING, Spacer 1027 Spring Mount Blower Assembly FAN Housing Weight KIT Model DCG3Model DCK3 Mounting KIT Support Bracket Model DCK3 Mounting KIT BAG Assembly Page Page