Dixon 114863 - DCK3 manual Operation

Page 7

SAFETY RULES

3 - Operation

Never run an engine in an enclosed area.

Only operate in good light, keeping away from holes and hidden hazards.

Slow down and use extra care on hillsides. Make turns gradually and at slow speed. Do not operate across the sides of slopes. Operate up and down slopes only. Do not operate on steep slopes.

Turf conditions can affect the machine’s stability. Do not operate on wet grass where traction may be reduced.

Do not change the engine governor setting or overspeed the engine.

Stop equipment and inspect vacuum impeller and hoses after striking objects or if an abnormal vibration occurs. Make necessary repairs before resuming operations.

Look behind and down before backing up to ensure a clear path.

Slow down and use caution when making turns and crossing roads and sidewalks. Stop vacuum and mower blades if not mowing.

Do not operate machine under the influence of alcohol or drugs.

Use care when loading or unloading the machine into a trailer or truck.

Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

4 - Maintenance and Storage:

Stop engine and disconnect spark plug wire. Wait for all movement to stop before adjusting, cleaning, or repairing.

Clean grass and debris from muffler and engine to help prevent fires. Clean up oil or fuel spillage.

Let engine cool before storing and do not store near sparks or open flame.

Shut off fuel while storing. Do not store fuel near flames or drain indoors.

Never allow untrained personnel to service machine.

Keep hands and feet away from moving parts. If possible, do not make adjustments with the engine running.

Keep all parts in good working condition and all hardware tightened. Replace all worn or damaged decals.

7

Image 7
Contents Collection System Operators Manual Page Dixon. All Rights Reserved Operators Guide IndexFeatures & Controls General Information Safety RulesOperation Unpacking Instructions AssemblyLanyard Hood Assembly Hood Hinge Hood Assembly Blower/Drive Kit Wing NUT Washer Belt Guard Operating the Collection System OperationTransport Service and MaintenanceCaring For Hoses Troubleshooting Guide Spindle Drive Assembly Parts Illustrations Hood Assembly QTY Description Hitch Assembly Hitch Blower KIT HUB, BEARING, Spacer 1027 Spring Mount Blower Assembly FAN Housing Model DCG3 Weight KITModel DCK3 Mounting KIT Support Bracket Model DCK3 Mounting KIT BAG Assembly Page Page