SPECIFICATIONS
Electrical Requirements | 120 V~ / 60 Hz / 6A | |
Staple Type | 1/4”, 5/16”, 1/2”, 9/16” | |
or Arrow T50® | ||
Nail Type | 9/16” | |
Accessories | 3/8” Staples (Qty. 400) | |
9/16” Nails (Qty. 100) | ||
|
Note: Performance of the Stapler/Nailer may vary depending on variations in local line voltage. Extension cord usage may also affect the tool perfor- mance.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Loading
To prevent Serious Injury:
Wear
area must also wear ANSI- approved impact safety goggles.
1.Lock the Trigger (10) by moving the Trigger Lock (3) to the right and unplug the tool before loading.
Note: To lock the Trigger (10), move the Trigger Lock (3) to the right.
To unlock the Trigger, move the Trig- ger Lock to the left.
2.Test for proper operation of the
Trigger Lock by attempting to fire a fastener into a piece of scrap wood while the Trigger is locked (the tool should not fire). (See Figure H.)
3.Push forward on the Pusher Cover
(2) and slightly downward to remove the Pusher assembly.
(See Figure D.)
4.Once removed, insert one strip of Staples (46) or Nails (47) in the Inner Staple Slot
(See Figures E, F.)
5.Reinsert the Pusher assembly into the Stapler/Nailer, making sure the Pusher Cover (2) locks securely in place. (See Figure G.)
STAPLES
(46)
D | E |
|
|
PUSHER COVER
(2)PUSHER ASSY.
NAILS |
| TRIGGER LOCK | |
(47) |
| (3) | |
| F | G | H |
|
|
|
|
|
| OUTER |
| STAPLE |
|
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
| SLOT (1) |
| ||
PUSHER ASSY. |
| ||||
|
| Magazine | |||
|
|
|
| ||
|
|
|
| LOCK (44) | |
SKU 93749 | For technical questions, please call | Page 7 |