Operation

To prevent Serious Injury:

Wear ANSI-approved impact safety goggles during use. Other people in the work area must also wear ANSI-approved impact safety goggles.

Figure I

TRIGGER

LOCK

TRIGGER

6.Store the Stapler/Nailer in a clean, dry, safe location out of reach of chil- dren.

1.Lock the Trigger by moving the Trigger Lock to the right. Then, plug the tool’s Power Cord/Plug into the nearest 120 volt, grounded, electrical outlet.

2.Unlock the Trigger by moving the Trigger Lock to the left.

3.To fire, firmly press the Nose of the

Stapler/Nailer on the workpiece. The Stapler/Nailer should not fire if the Trigger is not squeezed. Briefly squeeze the Trigger once; one Sta- ple/Nail will be fired.

4.If additional force is needed, your other hand can be used.

5.When finished using the Stapler/

Nailer, lock the Trigger by moving the Trigger Lock to the right. Un- plug the tool from its electrical outlet, and remove all unused Staples/Nails from the tool.

SKU 93749

For technical questions, please call 1-800-444-3353.

Page 8