5.Slide the Magazine Assembly back into place until it clicks.
Operation
1.Grip the Body [18] of the Stapler with both hands and press the Nozzle [19] against the surface you wish to staple. Be sure to keep your hands, fingers and other body parts away from the Nozzle.
2.Depress the Trigger [28] to activate the Stapler.
Your 1/2” Crown Air Stapler is easy to load and fun to use. With its comfortable grip and lightweight body, your Stapler is an ideal tool for working with upholstery, insulation, picture frames and more.
Parts List
ITEM | DESCRIPTION | ITEM | DESCRIPTION |
1 | Screw 5 x 22 | 29 | Step Pin up5 x 17.5 |
2 | Exhaust Cover | 30 | |
3 | Compression Spring | 31 | Tail Cover |
4 | Seal, Air | 32 | Air Plug |
5 | Cylinder Cap | 33 | Compression Spring |
6 | 34 | Click Lever | |
7 | Piston Set | 35 | Step Pin up5 x 26 |
8 | Washer 7.3 x 4.7 x 0.8 | 36 | |
9 | Head Valve Piston | 37 | Piston Head |
10 | Piston Stopper | 38 | Driver Blade Pin |
11 | 39 | Outer Spring Pin 4 x 10 | |
12 | 40 | Inner Spring Pin 2.5 x 10 | |
13 | Collar | 41 | Driver Blade |
14 | 42 | Screw 4 x 16 | |
15 | Cylinder | 43 | Driver Guide |
16 | Bumper | 44 | Spacer |
17 | Gasket | 45 | Screw 4 x 8 |
18 | Body | 46 | Stopper |
19 | Nozzle | 47 | Upper Magazine |
20 | Seal, Air | 48 | Screw 4 x 8 |
21 | Trigger Valve Head | 49 | Extension Spring |
22 | Trigger Valve Stem | 50 | Pusher |
23 | 51 | Magazine Assembly | |
24 | Trigger Valve Guide | 52 | Cylinder Cap Set |
25 | 53 | Head Valve Piston Set | |
26 | Compresion Spring | 54 | Collar Set |
27 | 55 | Cylinder Assembly | |
28 | Trigger | 56 | Trigger Valve Set |
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 46365 | Page 7 |