Grizzly instruction manual H7677 18 Gauge Stapler Kit

Page 5

Operating this stapler can propel objects into the air, causing imme- diate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this stapler discharges at 82 decibels. To protect your hearing, always wear ANSI approved ear protection when operating this stapler.

Never point this stapler at yourself or another person! Always pay attention to the direction this stapler is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious personal injury.

Stapler accidents routinely happen while moving the gun to another loca- tion, such as up ladders, to another room, or even another job site. Always disconnect the gun immediately after use and never transport the gun while connected to the air—even if the air compressor is disconnected from its power source!

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results.

H7677 18 Gauge Stapler Kit

-5-

Image 5
Contents Gauge Stapler KIT Before Operating This Equipment SafetySafety Instructions for Pneumatic Tools Safety Instructions for Pneumatic Tools Additional Safety Instructions for Staplers H7677 18 Gauge Stapler Kit Tool Data IntroductionForeword Contact Info UnpackingInventory SET UPCompressed Air System Disconnect Stapler from the AIR Supply Safety YokeOperating OperationsLoading Single/Bump Fire Operation Clearing Jammed Staples Replacing Pistons/O Rings CleaningLubricating MaintenanceH7677 Parts Breakdown Description H7677 Parts ListSymptom Possible Cause Solution TroubleshootingWarranty and Returns Warranty Card Place Stamp Here