Makita Model T220DW instruction manual Sight window

Page 11

Sight window

There is a convenient sight window on the / left side of the tool (when viewing the tool

from the front).. Use this sight window to check if there are staples in the magazine.

When staples are not visible through the window, load staples into the magazine.

Staples

Sight window

0Handle the staples and their box carefully. If the staples have been handled roughly, they may be bent out of shape, causing poor staple feed or jamming.

.Avoid storing the staples in a very humid or hot place or place exposed to direct sun- light.

0 Do not attempt to use staples that appear to be damaged, bent, rusty or corroded.

Extra staples

This tool has a space for storing extra

staples. When you wish to store extra

staples in this space, pull out the set plateSet plate and insert them into the space as shown in

the figure a t right.

staples into this space.

CAUTION :

Always hold the tool with the set plate facing up to prevent the extra staples from falling out when inserting or withdrawing the extra staples. Falling staples can present a danger to anyone or anything below.

11

Image 11
Contents Model T220D Model T22ODW Safety Instructions Page Important Safety INSTRUCTI0NS Additional Safety Rules For Charger & Battery Cartridge Additional Safety Rules Charging Safety system Page Lk---? Sight window Maintenance Accessories Cordless Stapler Release Plate Makita Corporation