908991 - 12-12-02.qxd 12/12/02 11:18 AM Page 8
Only use approved
Operator and others in work area MUST wear safety glasses with side shields. Always wear ANSI Z87.1 approved safety glasses, and ANSI S3.19 approved hearing protection when preparing or operating the tool.
Never use a tool that is leaking air, has missing or damaged parts, or requires repair.
2.Pull staple follower all the way to the rear (see Fig. 19), allowing follower to lock in the open position.
3.Drop a strip of staples onto the guide rail (see Fig. 20).
4.Depress the follower latch button (A) Fig. 21, to unlock the follower and slide forward against staples.
5.Adjust directional exhaust deflector (A) Fig. 22, so that the exhaust air blast will be directed away from the operator. The exhaust deflector provides seven detented positions for directing the exhaust blast away from the operator. Grasp the deflector and rotate it to the desired position for the current application.
➡
Fig. 18
Fig. 20
Fig. 19 | ➡ |
|
|
A
Fig. 21
A
Fig. 22
8