Philips SGC5101BD manual Start a Scene, Change a Scene

Setting Up the Philips amBX PC Scenes

Starting point

End point

You decrease the range by sliding the handles towards each other.

The moment you move the starting handle over the end handle (the handle on the bottom of the slider) the colored bar of the slider will flip and the outside color range is selected.

By changing the direction of the handles, you select the inside color range. You change the direction of the handles by double-clicking one of the handles.

How to...

Start a Scene

1.Select the Scene Setting tab.

The 'Scene Settings' screen appears.

2.Select the preferred scene in the Scene Selector.

3.Click the Start Scene button.

The selected scene starts and the Philips amBX™ PC Gaming Peripherals operate as programmed.

The Start scene button is a toggle button. When you press the button, an action starts and the label of the button changes, describing the opposite action.

Toggled State 1

Pressed

Toggled State 2

To stop the Scene, you click the same button in the Scene Settings screen that is now labeled 'Stop Scene'.

Tip

You can also use the On/Off button on the hardware to start and stop a selected scene.

Change a Scene

You can only change the available scenes in the Scenes Selector. You cannot add new scenes to the Scenes Selector, you can only customize the existing scenes by:

•Changing the Peripheral Scene Settings of a static scene,

•Add an animation to a static scene,

•Changing the Animation Settings of an animated scene.

27