Using Your Projector 35
6Power Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page29 and "Turning Your Projector Off" on
page29.
7Down / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
8LAMP warning light If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page108 and "Guiding Signals" on
page114.
9TEMP warning light If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page108 and "Guiding Signals" on
page114.
10 Enter Press to confirm the selection item.