Getting started
03
1If the system isn’t already on, press STANDBY/ON to switch it on.
2Press ROOM SETUP.
•If you have previously set up the room type and seating position, the display will show the current room settings.
3Press ENTER.
4 Use the (cursor up/down) buttons to select a room type then press
ENTER.
Choose one of the following depending on your room size:
•S – Smaller than average room
•M – Average room
•L – Larger than average room
5 Use the (cursor up/down) buttons to select a seating position setting, then press ENTER.
Choose one of the following depending on where your main listening position is:
•Fwd – If you are nearer to the front speakers than the surround speakers
•Mid – If you are equal distance from the front and surround speakers
•Back – If you are nearer to the surround speakers than the front speakers
•The Room Setup automatically sets up both channel level and speaker distance. If you have already set the channel levels manually (see page 59) or speaker distance settings (see page 58), you will see Room Set? in the display when you first press the ROOM SETUP button.
•Using the Room Setup will overwrite any previous settings you had for channel level and speaker distance.
•For a more detailed surround sound setup, see Setting up surround sound on page 57.
Using the on-screen displays
For ease of use, this system makes extensive use of graphical
All the screens are navigated in basically the same way, using the cursor buttons ( , ,
,) to change the highlighted item and pressing ENTER to select it.
•Throughout this manual, ‘Select’ means use the cursor buttons to highlight an item
English Italiano Français Deutsch Nederlands Español
21
En