Getting started
2 | Press SYSTEM SETUP. | |
3 | Use the | (cursor left/right) |
buttons to choose ‘St. Memory?’ then press ENTER.
4 Use the (cursor up/down) buttons to select the station preset you want.
There are 30 preset locations; each can store one station preset.
5 Press ENTER to save the station preset.
•If the system is unplugged from the power supply completely, saved stations will remain for several days, after which you’ll have to save them again.
Listening to station presets
1Make sure the TUNER function is selected.
2Use the ST +/– buttons to select a station preset.
Listening to other sources
You can connect up to four external sources (TV, satellite receiver, etc.) to this system, including one digital source. See also Connecting auxiliary components on page 72.
| STANDBY/ON | |
CD | FM/AM | L1/L2 |
DVD | TUNER TV | LINE |
DISPLAY |
| OPEN CLOSE |
1If the system isn’t already on, press STANDBY/ON to switch on.
Also make sure that the external source (TV, satellite receiver, etc.) is switched on.
2Select the source you want to listen to.
•Press TV to select the TV input, or use the LINE (L1/L2) button to select the LINE 1 ANA, LINE1 DIG or LINE 2 ANA input.
3If necessary, start playback of the external source.
03
English Italiano Français Deutsch Nederlands Español
29
En